Enviar artigo por via de e-mail Tool system for high-speed milling
- Autores: Maslov A.R.1
-
Afiliações:
- Stankin Moscow State Technical University
- Edição: Volume 36, Nº 3 (2016)
- Páginas: 232-234
- Seção: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/226269
- DOI: https://doi.org/10.3103/S1068798X16030138
- ID: 226269
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
A model of the tool system for the high-speed milling of high-technology components is developed. The influence of the dimensions of the system components on the roughness of the machined surface is studied. The formulas obtained permit assessment of the milling productivity for the dimensional parameters of the tool system and the roughness, specified for a specific technological process.
Palavras-chave
Sobre autores
A. Maslov
Stankin Moscow State Technical University
Autor responsável pela correspondência
Email: vestnik@stankin.ru
Rússia, Moscow
Arquivos suplementares
