| Edição |
Título |
Arquivo |
| Volume 36, Nº 6 (2016) |
Tensometric monitoring of the nonplanarity of circular saws in asymmetric flexure |
(Eng)
|
|
Alekseev A., Alabyshev A.
|
| Volume 36, Nº 6 (2016) |
Selection of lubricant composition for open contact systems in rolling stock |
(Eng)
|
|
Kokhanovskii V., Glazunov D.
|
| Volume 36, Nº 6 (2016) |
Deformation of metals with slight elastoplastic deformation |
(Eng)
|
|
Fomin M.
|
| Volume 36, Nº 6 (2016) |
A new machine tool with parallel kinematic structure |
(Eng)
|
|
Akmaev O., Enikeev B., Nigmatullin A.
|
| Volume 36, Nº 6 (2016) |
Wear of diamond tools in the dressing of discrete grinding wheels |
(Eng)
|
|
Morozov A.
|
| Volume 36, Nº 6 (2016) |
Self-adjusting hydraulic damper for a pneumatic robot |
(Eng)
|
|
Kuznetsov N.
|
| Volume 36, Nº 6 (2016) |
Influence of tool geometry on the stress–strain state of pipe in expansion by a shaped draw bar |
(Eng)
|
|
Bezukladnikov A., Parshin S.
|
| Volume 36, Nº 6 (2016) |
Transformation parametric structures of nano- and micromotors with longitudinal piezo effect |
(Eng)
|
|
Afonin S.
|
| Volume 36, Nº 6 (2016) |
Applications of natural diamonds in environmental monitoring systems |
(Eng)
|
|
Altukhov A., Teplova T., Feshchenko V., Gladchenkov E.
|
| Volume 36, Nº 6 (2016) |
Optimization of cutting processes |
(Eng)
|
|
Sal’nikov V., Hoang V.
|
| Volume 36, Nº 6 (2016) |
Analysis of current cutting standards |
(Eng)
|
|
Zabel’yan D.
|
| Volume 36, Nº 6 (2016) |
Shaping of a helical surface in rotary machining |
(Eng)
|
|
Popov M.
|
| Volume 36, Nº 6 (2016) |
Predicting the cutting properties of hard alloys for the manufacture of components used in gas-turbine engines |
(Eng)
|
|
Postnov V., Khadiullin S., Starovoitov S.
|
| Volume 36, Nº 6 (2016) |
Trends in research on metal-cutting machines |
(Eng)
|
|
Bushuev V., Kuznetsov A., Sabirov F., Khomyakov V., Molodtsov V.
|
| Volume 36, Nº 6 (2016) |
Express monitoring of the strength of threaded components |
(Eng)
|
|
Matlin M., Lebskii S., Kazankina E., Kazankin V., Manukyan D.
|
| Volume 36, Nº 5 (2016) |
New roughing method for external surfaces of revolution of hard-to-machine workpieces |
(Eng)
|
|
Maksimov A., Firsov A.
|
| Volume 36, Nº 5 (2016) |
Thermal conditions in the additive manufacture of metallic parts in vacuum |
(Eng)
|
|
Alyakrinskiy O., Bolkhovityanov D., Logachev P., Medvedev A., Semenov Y., Starostenko A.
|
| Volume 36, Nº 5 (2016) |
Machining polymer workpieces on a lathe after preliminary surface deformation |
(Eng)
|
|
Erenkov O., Vereshchagina A., Kravchenko E., Kozlova M.
|
| Volume 36, Nº 5 (2016) |
Polymer composites based on polytetrafluoroethylene modified with motor oil |
(Eng)
|
|
Petrova P., Fedorov A., Okhlopkova A.
|
| Volume 36, Nº 5 (2016) |
Calibration of thin-walled precision pipe by transverse compression and expansion using a multisector tool |
(Eng)
|
|
Vasechkin M., Davydov O., Egorov S., Kolomenskii A.
|
| Volume 36, Nº 5 (2016) |
Lubricator casings for locomotive wheel rims |
(Eng)
|
|
Kokhanovskii V., Maiba I., Glazunov D., Bol’shikh I.
|
| Volume 36, Nº 5 (2016) |
Taking account of the contact-layer pliability in end clip design |
(Eng)
|
|
Ermolaev M.
|
| Volume 36, Nº 5 (2016) |
Optimization of stays for the machining of long stepped shafts |
(Eng)
|
|
Yagopol’skii A., Kropotin N.
|
| Volume 36, Nº 5 (2016) |
Increasing the load capacity and rigidity of roller–screw mechanisms by adjusting the screw surfaces |
(Eng)
|
|
Morozov V., Panyukhin V., Zhdanov A.
|
| Volume 36, Nº 5 (2016) |
Self-braking of free-wheel mechanisms |
(Eng)
|
|
Goncharov A., Goncharov A.
|
| 876 - 900 de 991 resultados |
<< < 31 32 33 34 35 36 37 38 39 40 > >>
|
