Email this article Calibration of thin-walled precision pipe by transverse compression and expansion using a multisector tool
- Authors: Vasechkin M.A.1, Davydov O.Y.1, Egorov S.V.2, Kolomenskii A.B.1
-
Affiliations:
- Federal State Budget Educational Institution of Higher Education “Voronezh State University of Engineering Technologies” (FSBEI)
- OAO NII Avtomatizirovannykh Sredstv Proizvodstva i Kontrolya
- Issue: Vol 36, No 5 (2016)
- Pages: 366-370
- Section: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/226475
- DOI: https://doi.org/10.3103/S1068798X1605021X
- ID: 226475
Cite item
Open Access
Access granted
Subscription Access
Abstract
An experimental system is developed for the calibration of thin-walled precision pipe by transverse compression and expansion using a multisector tool. Formulas are derived for the basic parameters of the system.
About the authors
M. A. Vasechkin
Federal State Budget Educational Institution of Higher Education “Voronezh State University of Engineering Technologies” (FSBEI)
Author for correspondence.
Email: akvapaskal@mail.ru
Russian Federation, Voronezh, 394036
O. Yu. Davydov
Federal State Budget Educational Institution of Higher Education “Voronezh State University of Engineering Technologies” (FSBEI)
Email: akvapaskal@mail.ru
Russian Federation, Voronezh, 394036
S. V. Egorov
OAO NII Avtomatizirovannykh Sredstv Proizvodstva i Kontrolya
Email: akvapaskal@mail.ru
Russian Federation, Voronezh, 394076
A. B. Kolomenskii
Federal State Budget Educational Institution of Higher Education “Voronezh State University of Engineering Technologies” (FSBEI)
Email: akvapaskal@mail.ru
Russian Federation, Voronezh, 394036
Supplementary files
