| Edição |
Título |
Arquivo |
| Volume 36, Nº 10 (2016) |
High-speed drilling of small-diameter holes by core flat drills |
(Eng)
|
|
Myasnikov Y., Pimenov D.
|
| Volume 36, Nº 10 (2016) |
Longitudinal–transverse extrusion of hollow components from bar |
(Eng)
|
|
Danilin G., Filin D., Volzhin S.
|
| Volume 36, Nº 10 (2016) |
Adhesion fractures of a hard-alloy tool in turning austenitic steel |
(Eng)
|
|
Lipatov A.
|
| Volume 36, Nº 10 (2016) |
SPH modeling of chip formation in cutting unidirectional fiber-reinforced composite |
(Eng)
|
|
Shchurov I., Nikonov A., Boldyrev I., Ardashev D.
|
| Volume 36, Nº 10 (2016) |
Modeling of metal removal during an internal grinding in view of kinematics cutting features |
(Eng)
|
|
Pereverzev P., Akintseva A.
|
| Volume 36, Nº 10 (2016) |
Basic concepts in surface shaping by cutting tools |
(Eng)
|
|
Yudin A.
|
| Volume 36, Nº 10 (2016) |
Shaping of noncylindrical helical chip-channel surfaces in complex mills |
(Eng)
|
|
Shchegol’kov N.
|
| Volume 36, Nº 10 (2016) |
Optimal materials for the manufacture of metal-cutting machines |
(Eng)
|
|
Brailovskii M., Voskoboinik A., D’yakonov A., Shmidt I.
|
| Volume 36, Nº 10 (2016) |
Angular pressing of aluminum alloy |
(Eng)
|
|
Sosenushkin E., Ovechkin L., Sosenushkin A.
|
| Volume 36, Nº 10 (2016) |
Manufacture of metal–concrete basic components for high-precision lathes |
(Eng)
|
|
Brailovskii M., Voskoboinik A., D’yakonov A.
|
| Volume 36, Nº 10 (2016) |
Coordinate measurements of cylindrical-gear precision |
(Eng)
|
|
Pechenin V., Bolotov M., Ruzanov N.
|
| Volume 36, Nº 9 (2016) |
Dynamic stability of band saw machines |
(Eng)
|
|
Kremleva L., Malygin V., Lobanov N.
|
| Volume 36, Nº 9 (2016) |
Precision and efficiency of metal-cutting machines |
(Eng)
|
|
Bushuev V., Kuznetsov A., Sabirov F., Khomyakov V., Molodtsov V.
|
| Volume 36, Nº 9 (2016) |
Automated production system for reagents used in water and wastewater processing |
(Eng)
|
|
Arakcheev E., Brunman V., Brunman M., Volkov A., D’yachenko V., Kochetkov A., Petkova A.
|
| Volume 36, Nº 9 (2016) |
Automated 3D modeling of working turbine blades |
(Eng)
|
|
Ryazanov A.
|
| Volume 36, Nº 9 (2016) |
Automated management of manufacturing orders |
(Eng)
|
|
Kul’ga K.
|
| Volume 36, Nº 9 (2016) |
Improving tool life and machining precision in band saws |
(Eng)
|
|
Litvinov A.
|
| Volume 36, Nº 9 (2016) |
Plates in hydraulic presses with ohmic heaters |
(Eng)
|
|
Malygin E., Karpushkin S., Glebov A., Karpov S.
|
| Volume 36, Nº 9 (2016) |
Behavior of heat-resistant alloys and titanium alloys on cutting |
(Eng)
|
|
Petukhov G., Makarov V.
|
| Volume 36, Nº 9 (2016) |
Synthesis of roller screws |
(Eng)
|
|
Morozov V., Zhdanov A., Kosterin A.
|
| Volume 36, Nº 9 (2016) |
Burnishing with wear-resistant mineral–ceramic and hard-alloy indenters |
(Eng)
|
|
Gadalov V., Gvozdev A., Romanenko D., Vornacheva I., Kovalev S.
|
| Volume 36, Nº 9 (2016) |
Thermal distribution in the PTFE–steel frictional pair |
(Eng)
|
|
Sedakova E., Kozyrev Y.
|
| Volume 36, Nº 9 (2016) |
Stress and strain concentration in weld-joint flaws |
(Eng)
|
|
Manzhula K., Shlepetinskii A.
|
| Volume 36, Nº 9 (2016) |
Automated machining of turbine blades |
(Eng)
|
|
Poletaev V., Tsvetkov E.
|
| Volume 36, Nº 9 (2016) |
Reliability in gear shaping |
(Eng)
|
|
Grechishnikov V., Khusainov R., Yurasov S., Khaziev R.
|
| 801 - 825 de 991 resultados |
<< < 28 29 30 31 32 33 34 35 36 37 > >>
|
