Enviar artigo por via de e-mail Longitudinal–transverse extrusion of hollow components from bar
- Autores: Danilin G.A.1, Filin D.S.1, Volzhin S.G.2
-
Afiliações:
- Ustinov Voenmekh Baltic State Technical University
- OAO Tul’skii Patronnyi Zavod
- Edição: Volume 36, Nº 10 (2016)
- Páginas: 836-840
- Seção: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/227055
- DOI: https://doi.org/10.3103/S1068798X16100075
- ID: 227055
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The longitudinal–transverse extrusion of hollow components from bar is studied. Strength assessment of the blank is discussed. In view of the stress–strain state of the blanks, limits must be imposed on the process in order to maintain the strength of the lateral surface and prevent critical loads on the tool.
Sobre autores
G. Danilin
Ustinov Voenmekh Baltic State Technical University
Autor responsável pela correspondência
Email: bgtu_e4@mail.ru
Rússia, St. Petersburg
D. Filin
Ustinov Voenmekh Baltic State Technical University
Email: bgtu_e4@mail.ru
Rússia, St. Petersburg
S. Volzhin
OAO Tul’skii Patronnyi Zavod
Email: bgtu_e4@mail.ru
Rússia, Tula
Arquivos suplementares
