Rapid Monitoring of the Hardened-Layer Depth on a Steel Part

A. E. Perminov; M. G. Ignatov; E. Yu. Prokof’ev

doi:10.3103/S1068798X19050162

Rapid Monitoring of the Hardened-Layer Depth on a Steel Part

Authors: Perminov A.E.¹, Ignatov M.G.¹, Prokof’ev E.Y.¹
Affiliations:
1. Stupino Branch, Moscow Aviation Institute
Issue: Vol 39, No 5 (2019)
Pages: 394-395
Section: Article
URL: https://journals.rcsi.science/1068-798X/article/view/227709
DOI: https://doi.org/10.3103/S1068798X19050162
ID: 227709

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

A method is proposed for monitoring the cemented layer of hardened steel parts. Specifically, in the chip obtained on turning a solid of revolution by a pass-through cutter, the width of the corrugated section is measured, by means of sliding calipers or by photography.

Keywords

quenched parts, chip width, cementation, surface-layer depth, wear resistance, hardness

About the authors

A. E. Perminov

Stupino Branch, Moscow Aviation Institute

Author for correspondence.
Email: imt-ionny@yandex.ru
Russian Federation, Stupino, 125080

M. G. Ignatov

Stupino Branch, Moscow Aviation Institute

Email: imt-ionny@yandex.ru
Russian Federation, Stupino, 125080

E. Yu. Prokof’ev

Stupino Branch, Moscow Aviation Institute

Email: imt-ionny@yandex.ru
Russian Federation, Stupino, 125080

Supplementary files

Supplementary Files

Action

1. JATS XML

Download

Username
Password
Remember me

Forgot password?	Register

Username
Password
Remember me

Forgot password?	Register