Calculation of Electric Drives with Electric Machines of Unconventional Design


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

The design procedure for electric drives operating in a zone of large overloads or having the motor with unconventional rotor design is presented. The calculation of the magnetic system is based on the finite-element method. In addition, the settings for the phase currents come from the control system. To reduce the time of calculation, an algorithm for parallelizing the calculations by the criterion of maximum acceleration was developed. A determination of the possibilities of design procedures depending on the number of processors and the nature of the problem to be solved is presented. It is shown that, if an electric drive has small overloads and they are in the tolerance zone, then it is more appropriate to give a preference to simplified design models and the parameters of an electric machine can be replaced by lumped ones. If an asynchronous electric drive operates with larger overloads (with an impact character of the torque of resistance or when frequent starting-brake operating modes with relatively large dynamic torque), it is appropriate to use refined design procedures. Electric drives with a complicated configuration of the magnetic system—for example, drives with a synchronous reluctance machine—require taking the distributed nature of the motor magnetic system into account. Moreover, there are electric-drive operating modes in the zone of large overloads by torque and with angles β < 30°, when higher demands are placed on the initial data of the design model.

作者简介

A. Zhuravlev

South Ural State University

编辑信件的主要联系方式.
Email: journal-elektrotechnika@mail.ru
俄罗斯联邦, Chelyabinsk, 454080

M. Grigor’ev

South Ural State University

Email: journal-elektrotechnika@mail.ru
俄罗斯联邦, Chelyabinsk, 454080

补充文件

附件文件
动作
1. JATS XML

版权所有 © Allerton Press, Inc., 2018