| Шығарылым |
Атауы |
Файл |
| Том 40, № 4 (2019) |
Physical and Chemical Explanation of the Choice of a Counterbody Material for Friction Pairs with Polymer Materials |
(Eng)
|
|
Sedakova E., Kozyrev Y.
|
| Том 40, № 4 (2019) |
Tribotechnical Characteristics of Commercially Pure Titanium with Different Grain Sizes and TiC and TiO2 Coatings |
(Eng)
|
|
Semenov V., Alemayehu D., Schuster L., Raab G., Chertovskikh S., Astanin V., Huang S., Chernyak I.
|
| Том 40, № 4 (2019) |
Prediction Method of Contact Pressures, Wear and Life of Worm Gears with Archimedean and Involute Worm, Taking Tooth Correction into Account |
(Eng)
|
|
Chernets M.
|
| Том 40, № 4 (2019) |
A Parametric Failure Model for the Calculation of the Fit Tolerance of Joints with Clearance |
(Eng)
|
|
Leonov O., Shkaruba N.
|
| Том 40, № 4 (2019) |
Modeling of Indentation of Hard Coatings by an Arbitrarily Shaped Indenter |
(Eng)
|
|
Stepanov F., Torskaya E.
|
| Том 40, № 4 (2019) |
Improving the Tribological Properties of Polyethylene Products by Modification with Metal Chelate Complexes |
(Eng)
|
|
Danusina G., Derlugian P., Shishka V., Lyubchenko S., Kuzarov A., Strelnikov V., Shishka N.
|
| Том 40, № 3 (2019) |
Studying Nanotribological Properties of Functional Materials via Atomic Force Microscopy |
(Eng)
|
|
Zubar T., Chizhik S.
|
| Том 40, № 3 (2019) |
Evaluating the Applicability of Electrodeformation Placing Technology by a Flexible Tool for Chromeing Hydrocilindes |
(Eng)
|
|
Sheleg V., Levantsevich M., Maksimchenko N., Pilipchuk E., Yurut E., Kalach V.
|
| Том 40, № 3 (2019) |
Surface Parameters with Different Treatment Technologies and Their Effect on Wear |
(Eng)
|
|
Shalygin M.
|
| Том 40, № 3 (2019) |
Selection of Materials of Friction Lining Centrifugal Brake Rollers |
(Eng)
|
|
Nosko A., Safronov E., Kirillov D.
|
| Том 40, № 3 (2019) |
Modeling the Hydrodynamic Friction Mode on Amsler Type Friction Testing Machines |
(Eng)
|
|
Darovskoy G., Krotov V., Polyakov V., Ezupova M.
|
| Том 40, № 3 (2019) |
Powder Bearings with Polymer Inserts |
(Eng)
|
|
Kochanowski V., Mayba I., Glazunov D., Zoriev I.
|
| Том 40, № 3 (2019) |
Phase Composition, Mechanical and Tribological Properties of Ti–Al–N System Coatings Deposited by Vacuum-Arc Method |
(Eng)
|
|
Posylkina O., Latushkina S., Komarovskaya V.
|
| Том 40, № 3 (2019) |
Improving Wear Resistance of Fast-Cutting Steel R6M5 after a Volume Pulse Laser Strength |
(Eng)
|
|
Pinakhin I., Chernigovskij V., Bratsikhin A., Yagmurov M., Vladykina Y.
|
| Том 40, № 3 (2019) |
Calculating the Friction Force at Rest in Joints of Similar Hardness Assembled with Tightness |
(Eng)
|
|
Matlin M., Mozgunova A., Kazankina E., Kazankin V.
|
| Том 40, № 3 (2019) |
Markovian Chain Theory Application for the Description of Wearproof Powder Coating Profile under Sliding Friction |
(Eng)
|
|
Vinokurov G., Struchkov N., Popov O.
|
| Том 40, № 3 (2019) |
Modeling of Stationary Frictional Heating of a Coated Body |
(Eng)
|
|
Makhovskaya Y.
|
| Том 40, № 3 (2019) |
Research on the Effect of Lanolin on Rheological and Tribotechnical Characteristics of Complex Calcium Grease |
(Eng)
|
|
Bogdanov A.
|
| Том 40, № 3 (2019) |
Applying Anisotropy to Lubricant Oil Fluorescence to Evaluate Its Physical and Chemical Properties |
(Eng)
|
|
Markova L.
|
| Том 40, № 2 (2019) |
Wear of a Flexible Abrasive Tool |
(Eng)
|
|
Syreyshchikova N., Pimenov D.
|
| Том 40, № 2 (2019) |
Evaluation Method of Impact and Abrasive Steel Resistance |
(Eng)
|
|
Bratkovsky E., Shapovalov A., Dema R., Kharchenko M., Platov S., Rubanik V.
|
| Том 40, № 2 (2019) |
Investigation of the Correlation between the Natural Extension Ratio and Abrasive Wear Resistance in Polyethylene |
(Eng)
|
|
Gumen V., Knyazkina I., Kolbaya V., Kovriga V.
|
| Том 40, № 2 (2019) |
Investigation of Influence of Methods of Mixing Components on the Properties of Composites Based on PTFE and Carbon Fibers |
(Eng)
|
|
Petrova P., Markova M., Argunova A., Ohlopkova A.
|
| Том 40, № 2 (2019) |
Improving the Wear Resistance of Carbon Fiber Reinforced Polyvinylidene Fluoride by the Method of Radiation Modification |
(Eng)
|
|
Selkin V., Kopylov S.
|
| Том 40, № 2 (2019) |
Structure, as well as the Tribological and Mechanical Properties, of Extrudable Polymer-Polymeriс UHMWPE Composites for 3D Printing |
(Eng)
|
|
Panin S., Buslovich D., Kornienko L., Alexenko V., Dontsov Y., Shil’ko S.
|
| Нәтижелер 366 - 51/75 |
<< < 1 2 3 4 5 6 7 8 9 10 > >>
|
