| 期 |
标题 |
文件 |
| 卷 38, 编号 2 (2017) |
Studying tribotechnical properties of nanostructured lubricating oils with various dispersive media |
(Eng)
|
|
Bolotov A., Novikov V., Novikova O.
|
| 卷 38, 编号 2 (2017) |
A technique for forecasting the durability of rolling bearings and the optimum choice of lubricants under flood-lubrication and oil-starvation conditions |
(Eng)
|
|
Dmitrichenko N., Milanenko A., Hluhonets A., Minyaylo K.
|
| 卷 38, 编号 2 (2017) |
Effective activation energies of chemical reactions and viscous flow of liquids depending on pressure in tribosystems with boundary and mixed friction |
(Eng)
|
|
Bulgarevich S., Boyko M.
|
| 卷 38, 编号 2 (2017) |
Energy analysis of wear of sliding friction units |
(Eng)
|
|
Makhkamov K.
|
| 卷 38, 编号 2 (2017) |
Modeling elastomer wear under the effects of solid particles at an angle to the surface |
(Eng)
|
|
Kopchenkov V.
|
| 卷 38, 编号 2 (2017) |
Development of a new composite material for bits of supporting and centering devices |
(Eng)
|
|
Elagina O., Buklakov A., Janka L.
|
| 卷 38, 编号 2 (2017) |
Thermostressed state of a pad–disk tribosystem during single braking |
(Eng)
|
|
Adamovicz A.
|
| 卷 38, 编号 2 (2017) |
Calculation of the geometric position and the sizes of the static friction and sliding friction zones at the point of contact between an elastic wheel and a firm surface |
(Eng)
|
|
Balakina E.
|
| 卷 38, 编号 2 (2017) |
Closed-form solution of axisymmetric contact problem for a viscoelastic base within cycle of increasing and decreasing of load on the indenter |
(Eng)
|
|
Lyubicheva A.
|
| 卷 38, 编号 1 (2017) |
Study of the geometric characteristics of friction surfaces of diamonds during polishing |
(Eng)
|
|
Vinokurov G., Sharin P., Popov V.
|
| 卷 38, 编号 1 (2017) |
A technique for calculating tribotechnical characteristics of tractive cylindrical gear of VL-10 locomotive |
(Eng)
|
|
Chernets M., Chernets Y.
|
| 卷 38, 编号 1 (2017) |
Wear of inorganic materials upon wafering using an abrasive tool |
(Eng)
|
|
Bliznets D., Bogdanovich P.
|
| 卷 38, 编号 1 (2017) |
Increasing the wear resistance of reworked parts of transport engines |
(Eng)
|
|
Timofeeva L., Timofeev S., Fedchenko I., Dyomin A.
|
| 卷 38, 编号 1 (2017) |
Study of the influence of ring misalignment in rolling bearings on frictional torque and the fatigue life of supports |
(Eng)
|
|
Balyakin V., Zhilnikov E., Kosenok B., Lavrin A.
|
| 卷 38, 编号 1 (2017) |
Tribotechnical properties of thin-film coatings obtained by the tribomodifcation of crankshaft pins for ship diesel engines |
(Eng)
|
|
Leont’ev L., Shapkin N., Leont’ev A., Makarov V.
|
| 卷 38, 编号 1 (2017) |
The influence of friction and wear on the generation of surface microprofile of steel–sintered friction powder based on copper in the course of operation in lubricated medium |
(Eng)
|
|
Il’yushchenko A., Leshok A., Rogovoi A., Saroka D.
|
| 卷 38, 编号 1 (2017) |
Wear of metals in lubricated joints operating in start–stop mode |
(Eng)
|
|
Bogdanovich P.
|
| 卷 38, 编号 1 (2017) |
Transformation of 20Х13 steel structure during intensive friction interactions |
(Eng)
|
|
Meshkov V., Zorenko D., Barabonova I., Afanasieva L.
|
| 卷 38, 编号 1 (2017) |
Tribological behaviour of the self-lubricating polymers against steel 45 using different velocity |
(Eng)
|
|
Reškevičius G., Padgurskas J.
|
| 卷 38, 编号 1 (2017) |
Friction machine for accelerated wear tests of frictional rolling elements |
(Eng)
|
|
Korolev A., Korolev A.
|
| 卷 38, 编号 1 (2017) |
Express evaluation method of internal friction parameters in molding material briquettes |
(Eng)
|
|
Barsukov V., Tarasiuk V., Shapovalov V., Krupicz B., Barsukov V.
|
| 卷 38, 编号 1 (2017) |
Wear resistance of amorphous-crystalline detonation coatings with solid lubricant additive in vacuum |
(Eng)
|
|
Babak V., Shepetov V., Astahov E., Nedaiborshch S.
|
| 卷 38, 编号 1 (2017) |
Effect of bulk heat treatment and plasma surface hardening on the microstructure and erosion wear resistance of complex-alloyed cast irons with spheroidal vanadium carbides |
(Eng)
|
|
Efremenko V., Shimizu K., Pastukhova T., Chabak Y., Kusumoto K., Efremenko A.
|
| 卷 38, 编号 1 (2017) |
On the wear rate of an Sn11Sb5.5Cu Babbitt |
(Eng)
|
|
Valeeva A., Valeev I., Fazlyakhmetov R.
|
| 卷 37, 编号 6 (2016) |
Biotribological properties of dentures lubricated with artificial saliva |
(Eng)
|
|
Mystkowska J., Karalus W., Sidorenko J., Dąbrowski J., Kalska-Szostko B.
|
| 251 - 275 的 366 信息 |
<< < 6 7 8 9 10 11 12 13 14 15 > >>
|
