Comparison of Electron Beam Scattering at Edges of 3D-Printed Plastic and Metal Collimators


Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription Access

Abstract

Dose distributions of 6-MeV electrons in the region of edges of metal and plastic collimators are compared using calculated and experimental data. The results of the study show an insignificant disagreement in the dose distributions: the difference in the penumbra widths does not exceed 1.1 mm.

About the authors

A. A. Krasnykh

National research Tomsk Polytechnic University

Email: kazar@sci.lebedev.ru
Russian Federation, 30 Lenin Ave., Tomsk, 634034

Yu. M. Cherepennikov

National research Tomsk Polytechnic University

Email: kazar@sci.lebedev.ru
Russian Federation, 30 Lenin Ave., Tomsk, 634034

S. G. Stuchebrov

National research Tomsk Polytechnic University

Email: kazar@sci.lebedev.ru
Russian Federation, 30 Lenin Ave., Tomsk, 634034

I. A. Miloichikova

National research Tomsk Polytechnic University; Tomsk Cancer Research Institute, Tomsk National Research Medical Center

Email: kazar@sci.lebedev.ru
Russian Federation, 30 Lenin Ave., Tomsk, 634034; 5 Kooperativnyi Per., Tomsk, 634050

B. M. Gavrikov

Moscow Municipal Oncological Hospital no. 62

Email: kazar@sci.lebedev.ru
Russian Federation, Krasnogorskii district, Stepanovskoe, 27 Istra Vill., Moscow region, 143423

D. A. Belousov

Institute of Automation and Electrometry

Email: kazar@sci.lebedev.ru
Russian Federation, 1 Academician Koptyug Ave., Novosibirsk, 630090

M. A. Kazaryan

Lebedev Physical Institute

Author for correspondence.
Email: kazar@sci.lebedev.ru
Russian Federation, 53 Leninskii Pr., Moscow, 119991

Supplementary files

Supplementary Files
Action
1. JATS XML

Copyright (c) 2019 Allerton Press, Inc.