Comparison of Electron Beam Scattering at Edges of 3D-Printed Plastic and Metal Collimators


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

Dose distributions of 6-MeV electrons in the region of edges of metal and plastic collimators are compared using calculated and experimental data. The results of the study show an insignificant disagreement in the dose distributions: the difference in the penumbra widths does not exceed 1.1 mm.

Sobre autores

A. Krasnykh

National research Tomsk Polytechnic University

Email: kazar@sci.lebedev.ru
Rússia, 30 Lenin Ave., Tomsk, 634034

Yu. Cherepennikov

National research Tomsk Polytechnic University

Email: kazar@sci.lebedev.ru
Rússia, 30 Lenin Ave., Tomsk, 634034

S. Stuchebrov

National research Tomsk Polytechnic University

Email: kazar@sci.lebedev.ru
Rússia, 30 Lenin Ave., Tomsk, 634034

I. Miloichikova

National research Tomsk Polytechnic University; Tomsk Cancer Research Institute, Tomsk National Research Medical Center

Email: kazar@sci.lebedev.ru
Rússia, 30 Lenin Ave., Tomsk, 634034; 5 Kooperativnyi Per., Tomsk, 634050

B. Gavrikov

Moscow Municipal Oncological Hospital no. 62

Email: kazar@sci.lebedev.ru
Rússia, Krasnogorskii district, Stepanovskoe, 27 Istra Vill., Moscow region, 143423

D. Belousov

Institute of Automation and Electrometry

Email: kazar@sci.lebedev.ru
Rússia, 1 Academician Koptyug Ave., Novosibirsk, 630090

M. Kazaryan

Lebedev Physical Institute

Autor responsável pela correspondência
Email: kazar@sci.lebedev.ru
Rússia, 53 Leninskii Pr., Moscow, 119991

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Allerton Press, Inc., 2019