Search

Issue
Title
Authors
Vol 60, No 5 (2019)
Fabrication of Silumins Using Silicon Production Waste
Kuz’min M.P., Larionov L.M., Kondratiev V.V., Kuz’mina M.Y., Grigoriev V.G., Knizhnik A.V., Kuz’mina A.S.
PDF
(Eng)
Vol 57, No 5 (2016)
Influence of annealing on electrical resistance and hardness of hot-rolled aluminum alloy sheets containing up to 0.5% Zr
Belov N.A., Dostaeva A.M., Shurkin P.K., Korotkova N.O., Yakovlev A.A.
PDF
(Eng)
Vol 58, No 5 (2017)
Corrosion behavior on the different zones of AA2014 welded aluminum alloy by AA5554 filler aluminum alloy with TIG process: Before and after solution heat treatments followed by ageing
Zazi N., Ifires M., Mehala S., Chopart J.P.
PDF
(Eng)
Vol 60, No 6 (2019)
Formation of Side Ledge and Bottom Ledge in an Aluminum Electrolyzer
Ivanova A.M., Arkhipov P.A., Rudenko A.V., Tkacheva O.Y., Zaikov Y.P.
PDF
(Eng)
Vol 60, No 3 (2019)
Numerical Investigation into the Influence of Overheating of Aluminum Melt on the Heat Exchange in the Continuous Combined Casting and Pressing
Skuratov A.P., Potapenko A.S., Gorokhov Y.V., Popiyakova N.P.
PDF
(Eng)
Vol 59, No 5 (2018)
Influence of Methods of Producing the AlTi Master Alloy on Its Structure and Efficiency in the Grain Refinement of Aluminum Alloy
Nikitin K.V., Timoshkin I.Y., Nikitin V.I.
PDF
(Eng)
Vol 59, No 1 (2018)
Effect of Welding Speed on Gas Metal Arc Weld Pool in Commercially Pure Aluminum: Theoretically and Experimentally
Morakabiyan Esfahani M., Farzadi A., Alavi Zaree S.R.
PDF
(Eng)
Vol 58, No 4 (2017)
Influence of temperatures of melt overheating and pouring on the quality of aluminum alloy lost foam castings
Deev V.B., Ponomareva K.V., Prikhodko O.G., Smetanyuk S.V.
PDF
(Eng)
Vol 57, No 7 (2016)
Application of PAP-2 aluminum powder to produce powdered composite materials: The features of technology, structure, and physicomechanical properties of composites. Part I. Process approaches providing the formation of composite materials and applied procedures for determining their physicomechanical properties
Ivanov D.A., Sitnikov A.I., Ivanov A.V., Shlyapin S.D.
PDF
(Eng)
Vol 60, No 6 (2019)
Kinetic Evaluation of the Possibility of Aluminum and Magnesium Recovery from Aqueous Solutions of Their Salts as an Alternative to the Electrolysis of Melts
Nemchinova N.V., Yakovleva A.A.
PDF
(Eng)
Vol 60, No 1 (2019)
Peculiarities of Granulation of the PAP-2 Aluminum Powder in the Technology of the Al–Al2O3 Powder Composite with a Layered Structure
Ivanov D.A., Shlyapin S.D., Valyano G.E., Fedorova L.V.
PDF
(Eng)
Vol 59, No 5 (2018)
Influence of Electrolyte Overheating and Composition on the Sideledge of an Aluminum Bath
Stakhanov V.V., Redkin A.A., Zaikov Y.P., Galashev A.E.
PDF
(Eng)
Vol 59, No 1 (2018)
Development of Fabrication Modes of Deformed Semifinished Products from the Experimental Scandium-Containing Aluminum Alloy and Investigation into Their Mechanical Properties
Baranov V.N., Sidelnikov S.B., Zenkin E.Y., Voroshilov D.S.
PDF
(Eng)
Vol 58, No 3 (2017)
Role of powder precursors in production of composite alloys using liquid-phase methods
Prusov E.S., Panfilov A.A., Kechin V.A.
PDF
(Eng)
Vol 57, No 5 (2016)
Investigation on effect of pulse correction on structure property in dissimilar welds of galvanized steel and aluminum alloy obtained by gas metal arc welding cold metal transfer
Milani A.M., Paidar M.
PDF
(Eng)
Vol 60, No 1 (2019)
Development of the Production Technology of Cast Aluminum Matrix Composite by Alumina Strengthening Phase Synthesis in an Aluminum Melt
Chernyshov E.A., Romanov A.D., Romanova E.A., Mylnikov V.V.
PDF
(Eng)
Vol 59, No 4 (2018)
Fabrication of Metallic Powders for Energy-Intensive Combustible Compositions by Mechanochemical Treatment: 1. Peculiarities of the Structure and State of Aluminum Powder Particles Formed by Mechanochemical Treatment
Mofa N.N., Sadykov B.S., Bakkara A.E., Mansurov Z.A.
PDF
(Eng)
Vol 59, No 1 (2018)
A Novel Developed Grain Refiner (Al–Y–B Master Alloys) Using Yttrium and KBF4 Powders
Xu R., Sun Q., Wang Z., Xu Y., Ren W.
PDF
(Eng)
Vol 58, No 3 (2017)
Improving the precipitation of arsenic trisulfide from washing waters of sulfuric-acid production of copper smelteries
Mamyachenkov S.V., Anisimova O.S., Kostina D.A.
PDF
(Eng)
Vol 60, No 4 (2019)
Self-Propagating High-Temperature Synthesis of (Al–2% Mn)–10% TiC and (Al–5% Cu–2% Mn)–10% TiC Nanostructured Composite Alloys Doped with Manganese Powder
Luts A.R., Amosov A.P., Latukhin E.I., Rybakov A.D., Novikov V.A., Shipilov S.I.
PDF
(Eng)
Vol 60, No 1 (2019)
Application of Recycling Products of Aluminum Slags in Investment Casting Technology
Nikitin K.V., Sokolov A.V., Nikitin V.I., D’yachkov V.N.
PDF
(Eng)
Vol 59, No 3 (2018)
Influence of a Silicon Additive on Resistivity and Hardness of the Al–1% Fe–0.3% Zr Alloy
Belov N.A., Korotkova N.O., Alabin A.N., Mishurov S.S.
PDF
(Eng)
Vol 58, No 6 (2017)
Comparison of the Tendency to Pitting Corrosion of Casting of Al6Ca, Al1Fe, and Al6Ca1Fe Experimental Alloys and AK12M2 Industrial Alloy
Volkova O.V., Dub A.V., Rakoch A.G., Gladkova A.A., Samoshina M.E.
PDF
(Eng)
Vol 58, No 2 (2017)
Investigation into the corrosion rate and features of the samples made of nanostructured aluminum alloy in the H2S-containing medium
Klevtsov G.V., Valiev R.Z., Kushnarenko V.M., Klevtsova N.A., Merson E.D., Pigaleva I.N.
PDF
(Eng)
Vol 57, No 3 (2016)
Melt treatment by pulsed magnetic fields aimed at controlling the structure and properties of industrial silumins
Nikitin K.V., Nikitin V.I., Timoshkin I.Y., Glushchenkov V.A., Chernikov D.G.
PDF
(Eng)
1 - 25 of 52 Items 1 2 3 > >> 

Search tips:

  • Search terms are case-insensitive
  • Common words are ignored
  • By default only articles containing all terms in the query are returned (i.e., AND is implied)
  • Combine multiple words with OR to find articles containing either term; e.g., education OR research
  • Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
  • Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
  • Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
  • Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"