| 期 |
标题 |
文件 |
| 卷 60, 编号 6 (2019) |
Investigation into the Surface Layer Composition Formed on the Ml19 (Mg–Nd–Y–Zn–Zr) Magnesium Alloy during Melting under Protective Gas Atmospheres |
(Eng)
|
|
Bazhenov V., Koltygin A., Titov A., Rizhskiy A., Belov V.
|
| 卷 60, 编号 5 (2019) |
Structure and Properties of the ML5 Alloy for Various Modification Methods |
(Eng)
|
|
Bobryshev B., Moiseev V., Kipin I., Petrov I.
|
| 卷 60, 编号 3 (2019) |
Numerical Investigation into the Influence of Overheating of Aluminum Melt on the Heat Exchange in the Continuous Combined Casting and Pressing |
(Eng)
|
|
Skuratov A., Potapenko A., Gorokhov Y., Popiyakova N.
|
| 卷 60, 编号 1 (2019) |
Application of Recycling Products of Aluminum Slags in Investment Casting Technology |
(Eng)
|
|
Nikitin K., Sokolov A., Nikitin V., D’yachkov V.
|
| 卷 59, 编号 6 (2018) |
Prediction of Misruns in ML5 (AZ91) Alloy Casting and Alloy Fluidity Using Numerical Simulation |
(Eng)
|
|
Petrova A., Bazhenov V., Koltygin A.
|
| 卷 59, 编号 6 (2018) |
Investigation into the Structure and Properties of Solders Based on Aluminum and Zinc in the Form of Cast Rods of a Small Cross Section |
(Eng)
|
|
Nikitin K., Timoshkin I., Nikitin V.
|
| 卷 59, 编号 5 (2018) |
Influence of Methods of Producing the AlTi Master Alloy on Its Structure and Efficiency in the Grain Refinement of Aluminum Alloy |
(Eng)
|
|
Nikitin K., Timoshkin I., Nikitin V.
|
| 卷 59, 编号 4 (2018) |
Effects of Indium Content on Microstructural, Mechanical Properties and Melting Temperature of SAC305 Solder Alloys |
(Eng)
|
|
Sungkhaphaitoon P., Chantaramanee S.
|
| 卷 59, 编号 3 (2018) |
Influence of the Magnetic Field on the Crystallization of Aluminum Melts |
(Eng)
|
|
Vdovin K., Dubski G., Egorova L.
|
| 卷 59, 编号 1 (2018) |
The Influence of Composition and Heat Treatment on the Phase Composition and Mechanical Properties of ML19 Magnesium Alloy |
(Eng)
|
|
Koltygin A., Bazhenov V., Letyagin N., Belov V.
|
| 卷 59, 编号 1 (2018) |
SHS Metallurgy of Composite Materials Based on the Nb–Si System |
(Eng)
|
|
Yukhvid V., Andreev D., Sanin V., Sachkova N.
|
| 卷 59, 编号 1 (2018) |
A Novel Developed Grain Refiner (Al–Y–B Master Alloys) Using Yttrium and KBF4 Powders |
(Eng)
|
|
Xu R., Sun Q., Wang Z., Xu Y., Ren W.
|
| 卷 58, 编号 6 (2017) |
Effect of Composition and Distribution of Phases after Aging on Stamp Ability for Aluminum Alloy D16 (AA2014) Sheets |
(Eng)
|
|
Grechnikov F., Nosova E.
|
| 卷 58, 编号 5 (2017) |
Influence of melting conditions of aluminum alloys on the properties and quality of castings obtained by lost foam casting |
(Eng)
|
|
Deev V., Ponomareva K., Kutsenko A., Prikhodko O., Smetanyuk S.
|
| 卷 58, 编号 5 (2017) |
Influence of various types of treatment on the structure, density, and electrical conductivity of deformed alloys of the Al–Mg system |
(Eng)
|
|
Nikitin K., Nikitin V., Krivopalov D., Glushchenkov V., Chernikov D.
|
| 卷 58, 编号 5 (2017) |
Simulation of the temperature distribution on the mold surface and inside casting during high-gradient directional solidification |
(Eng)
|
|
Bondarenko Y., Echin A., Bazhenov V., Koltygin A.
|
| 卷 58, 编号 5 (2017) |
Investigation of spherisation in microstructures of aluminium casting alloys for thixoforging process |
(Eng)
|
|
Guler K., Gecu R., Kisasoz A., Karaaslan A.
|
| 卷 58, 编号 4 (2017) |
Influence of temperatures of melt overheating and pouring on the quality of aluminum alloy lost foam castings |
(Eng)
|
|
Deev V., Ponomareva K., Prikhodko O., Smetanyuk S.
|
| 卷 58, 编号 4 (2017) |
Influence of modifiers on the change of mechanical properties of silumins |
(Eng)
|
|
Nikitin K., Nikitin V., Timoshkin I.
|
| 卷 58, 编号 3 (2017) |
Investigation of operational characteristics of special-purpose alloy castings |
(Eng)
|
|
Mysik R., Pavlinich S., Kulakov B., Bakerin S., Brusnitsyn S., Sulitsin A.
|
| 卷 58, 编号 3 (2017) |
Influence of orbital shaking on microstructure and mechanical properties of A380 aluminium alloy produced by lost foam casting |
(Eng)
|
|
Kisasoz A., Guler K., Karaaslan A.
|
| 卷 58, 编号 2 (2017) |
Determination of interface heat transfer coefficient between aluminum casting and graphite mold |
(Eng)
|
|
Bazhenov V., Koltygin A., Tselovalnik Y., Sannikov A.
|
| 卷 58, 编号 1 (2017) |
Highly thermostable ceramic molds for shaped castings of titanium alloys |
(Eng)
|
|
Varfolomeev M., Moiseev V., Shcherbakova G.
|
| 卷 58, 编号 1 (2017) |
Influence of crystallization conditions on the structure and modifying ability of Al–Sc alloys |
(Eng)
|
|
Tkacheva O., Brodova I., Arhipov P., Zaikov Y.
|
| 卷 57, 编号 7 (2016) |
Determination of the heat-transfer coefficient between the AK7ch (A356) alloy casting and no-bake mold |
(Eng)
|
|
Bazhenov V., Koltygin A., Tselovalnik Y.
|
| 1 - 25 的 29 信息 |
1 2 > >>
|
