Simulation of Electron-Optical Systems with a Converging Sheet Beam for Terahertz Traveling-Wave Tubes
- Autores: Burtsev A.1,2, Danilushkin A.2
-
Afiliações:
- ALMAZ Research and Production Enterprise
- Gagarin State Technical University of Saratov
- Edição: Volume 64, Nº 10 (2019)
- Páginas: 1119-1122
- Seção: Microwave Electronics
- URL: https://journals.rcsi.science/1064-2269/article/view/201373
- DOI: https://doi.org/10.1134/S1064226919090067
- ID: 201373
Citar
Resumo
A converging sheet electron beam with a cross section of 0.05 × 2 mm2 and a current density of 200 A/cm2 formed by an electron gun is modeled using the synthesis and analysis methods with partial and complete magnetic shielding of the cathode and a linear compression of 10 and 15. The cross-sectional deformation of the beam in a focusing magnetic field is analyzed based on the three-dimensional computer model of electron-optical systems with a sheet electron beam. The possibility of generation of a low-perveance flux with small deformation in the transit channel of a comb slow-wave structure up to 30 mm in length is demonstrated.
Sobre autores
A. Burtsev
ALMAZ Research and Production Enterprise; Gagarin State Technical University of Saratov
Autor responsável pela correspondência
Email: antbourtsew@gmail.com
Rússia, Saratov, 410033; Saratov, 410054
A. Danilushkin
Gagarin State Technical University of Saratov
Email: antbourtsew@gmail.com
Rússia, Saratov, 410054