Email this article Analysis of Electrical Discharge Machining
- Authors: Sarilov M.Y.1, Myl’nikov V.V.2
-
Affiliations:
- Komsomolsk-na-Amure State Technical University
- Nizhny Novgorod State University of Architecture and Civil Engineering
- Issue: Vol 64, No 6 (2019)
- Pages: 833-838
- Section: Physical Science of Materials
- URL: https://journals.rcsi.science/1063-7842/article/view/203564
- DOI: https://doi.org/10.1134/S1063784219060185
- ID: 203564
Cite item
Open Access
Access granted
Subscription Access
Abstract
Breakdown in liquid dielectric medium, plasma channel, and heat transfer in the course of electrical discharge machining are studied. Specific features and most important parameters of electrical discharge machining of titanium and aluminum alloys are determined. Theoretical, experimental, and simulated results indicate that the adequacy hypothesis can be accepted at a confidence level of 95%, since the Fisher criterion is no greater than the reference value.
About the authors
M. Yu. Sarilov
Komsomolsk-na-Amure State Technical University
Author for correspondence.
Email: sarilov@knastu.ru
Russian Federation, Komsomolsk-na-Amure, 681013
V. V. Myl’nikov
Nizhny Novgorod State University of Architecture and Civil Engineering
Author for correspondence.
Email: mrmylnikov@mail.ru
Russian Federation, Nizhny Novgorod, 603950
