Deposition of NiFe(200) and NiFe(111) textured films onto Si/SiO2 substrates by DC magnetron sputtering


Дәйексөз келтіру

Толық мәтін

Ашық рұқсат Ашық рұқсат
Рұқсат жабық Рұқсат берілді
Рұқсат жабық Тек жазылушылар үшін

Аннотация

The effect of substrate temperature Tsub and bias voltage Ubias on the texture of NiFe films with thickness d ∼ 30–340 nm deposited by DC magnetron sputtering onto Si(111)/SiO2 substrates under working gas pressure ∼ 0.2 Pa has been investigated. It has been demonstrated that films grown at room substrate temperature have the (111) texture that is refined under a negative bias voltage. The deposition of films onto a grounded (Ubias ∼ 0) substrate heated to Tsub ∼ 440–640 K results in the formation of textured NiFe(200) films.

Авторлар туралы

A. Dzhumaliev

Kotel’nikov Institute of Radio Engineering and Electronics (Saratov Branch); Chernyshevsky Saratov State University

Хат алмасуға жауапты Автор.
Email: dzhas@yandex.ru
Ресей, ul. Zelenaya 38, Saratov, 410019; ul. Astrakhanskaya 83, Saratov, 410012

Yu. Nikulin

Kotel’nikov Institute of Radio Engineering and Electronics (Saratov Branch); Chernyshevsky Saratov State University

Email: dzhas@yandex.ru
Ресей, ul. Zelenaya 38, Saratov, 410019; ul. Astrakhanskaya 83, Saratov, 410012

Yu. Filimonov

Kotel’nikov Institute of Radio Engineering and Electronics (Saratov Branch); Chernyshevsky Saratov State University; Gagarin State Technical University of Saratov

Email: dzhas@yandex.ru
Ресей, ul. Zelenaya 38, Saratov, 410019; ul. Astrakhanskaya 83, Saratov, 410012; ul. Politekhnicheskaya 77, Saratov, 410054

Қосымша файлдар

Қосымша файлдар
Әрекет
1. JATS XML

© Pleiades Publishing, Ltd., 2016