Relationship of Mg2Si Phase-Content and Thermal Expansion Properties of Mg–Si and Mg–Si–Ca Alloys


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

The thermal expansion properties of Mg–xSi (x = 1, 1.38, 2, 3, and 4 wt %) binary alloys and Mg–4Si–yCa (y = 0.2, 0.4, 0.6, 0.8, and 1.0 wt %) alloys over a temperature range of 25–300°C were systematically studied. The results show that the Mg–Si binary alloys consist of α-Mg and Mg2Si phases. The volume fraction of Mg2Si phase increases with the increase of Si content in Mg–Si alloys, from 30.72 to 46.50% when Si content increases from 1 to 4 wt % Si. The coefficient of thermal expansion (CTE) of Mg–xSi binary alloys decreases with the increase of Mg2Si volume fraction. The addition of Ca element to Mg–4Si alloys has an obvious modification effect on the Mg2Si phase. When the Ca content increases constantly, the CTE of the Mg–4Si–Ca alloys increases at first, then it continues to decline. The mechanism is mainly related to the formation of the CaMgSi phase.

作者简介

S. Wu

State Key Lab of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology

编辑信件的主要联系方式.
Email: ssw636@hust.edu.cn
中国, Wuhan, 430074

T. Guo

State Key Lab of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology

Email: ssw636@hust.edu.cn
中国, Wuhan, 430074

P. An

State Key Lab of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology

Email: ssw636@hust.edu.cn
中国, Wuhan, 430074

X. Zhou

State Key Lab of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology

Email: ssw636@hust.edu.cn
中国, Wuhan, 430074

S. Lü

State Key Lab of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology

Email: ssw636@hust.edu.cn
中国, Wuhan, 430074

补充文件

附件文件
动作
1. JATS XML

版权所有 © Pleiades Publishing, Ltd., 2019