Email this article Destruction of ABS Polymer in the Glass State under Dynamic Stressing
- Authors: Atroshenko S.A.1,2, Chevrychkina A.A.1,2, Evstifeev A.D.1, Volkov G.A.1,2
-
Affiliations:
- Institute for Problems of Mechanical Engineering, Russian Academy of Sciences
- St. Petersburg State University
- Issue: Vol 61, No 11 (2019)
- Pages: 2075-2082
- Section: Mechanical Properties, Physics of Strength, and Plasticity
- URL: https://journals.rcsi.science/1063-7834/article/view/206552
- DOI: https://doi.org/10.1134/S1063783419110052
- ID: 206552
Cite item
Open Access
Access granted
Subscription Access
Abstract
This article describes the experimental and theoretical studies of the mechanisms of failure of ABS polymer in the range of strain rates of 10–4–103 s–1 at different temperatures of testing (from an ambient temperature of 23 to 100°C). The alteration of the type of failure as a function of the strain rate and temperature is analyzed. Based on the structure–time approach, a model of the temperature–rate superposition is proposed.
About the authors
S. A. Atroshenko
Institute for Problems of Mechanical Engineering, Russian Academy of Sciences; St. Petersburg State University
Email: Anastasiia.Che@gmail.com
Russian Federation, St. Petersburg; St. Petersburg
A. A. Chevrychkina
Institute for Problems of Mechanical Engineering, Russian Academy of Sciences; St. Petersburg State University
Author for correspondence.
Email: Anastasiia.Che@gmail.com
Russian Federation, St. Petersburg; St. Petersburg
A. D. Evstifeev
Institute for Problems of Mechanical Engineering, Russian Academy of Sciences
Email: Anastasiia.Che@gmail.com
Russian Federation, St. Petersburg
G. A. Volkov
Institute for Problems of Mechanical Engineering, Russian Academy of Sciences; St. Petersburg State University
Email: Anastasiia.Che@gmail.com
Russian Federation, St. Petersburg; St. Petersburg
Supplementary files
