Mechanism of the Influence of Poly- and Nanocrystallinity on the Parameters of Pseudoelastic Deformation Curves of Alloys with the Shape Memory Effect
- Autores: Malygin G.A.1
- 
							Afiliações: 
							- Ioffe Institute
 
- Edição: Volume 60, Nº 10 (2018)
- Páginas: 2034-2038
- Seção: Mechanical Properties, Physics of Strength, and Plasticity
- URL: https://journals.rcsi.science/1063-7834/article/view/204115
- DOI: https://doi.org/10.1134/S1063783418100177
- ID: 204115
Citar
Resumo
The influence of poly- and nanocrystallinity on the parameters of pseudoelastic deformation curves of alloys with the shape memory effect (SME) has been analyzed within the theory of diffuse martensitic transformations. The functional and quantitative dependence of the coefficient of deformation (martensitic) hardening of an alloy with the SME on the grain size d and orientational factor M, dσ/dε ~ 1/Md2, has been obtained for the first time, taking into account the normal distribution density of grains over their orientations and the log-normal distribution density over grain sizes d. A comparison of the found dependence with the data in the literature for a nanocrystalline TiNi alloy with nanograin sizes in the range of 8–90 nm shows good consistency between the theory and experiments.
Sobre autores
G. Malygin
Ioffe Institute
							Autor responsável pela correspondência
							Email: malygin.ga@mail.ioffe.ru
				                					                																			                												                	Rússia, 							St. Petersburg, 194021						
Arquivos suplementares
 
				
			 
						 
						 
					 
						 
						 
				 
  
  
  
  
  Enviar artigo por via de e-mail
			Enviar artigo por via de e-mail  Acesso aberto
		                                Acesso aberto Acesso está concedido
						Acesso está concedido Somente assinantes
		                                		                                        Somente assinantes
		                                					