Viscoelasticity and plasticity mechanisms of human dentin
- Authors: Borodin E.N.1,2,3, Seyedkavoosi S.4, Zaitsev D.1, Drach B.4, Mikaelyan K.N.3, Panfilov P.E.1, Gutkin M.Y.3,5,6, Sevostianov I.4
-
Affiliations:
- Institute of Natural Sciences
- Chelyabinsk State University
- Institute of Problems of Mechanical Engineering
- Department of Mechanical and Aerospace Engineering
- Peter the Great Saint-Petersburg Polytechnic University
- ITMO University
- Issue: Vol 60, No 1 (2018)
- Pages: 120-128
- Section: Mechanical Properties, Physics of Strength, and Plasticity
- URL: https://journals.rcsi.science/1063-7834/article/view/201921
- DOI: https://doi.org/10.1134/S1063783418010079
- ID: 201921
Cite item
Abstract
Theoretical models of viscoelastic behavior and plastic deformation mechanisms of human dentin are considered. Using the linear viscoelasticity theory in which creep and relaxation kernels have the form of fraction-exponential functions, numerical values of instantaneous and long-time Young’s moduli and other characteristics of dentin viscoelasticity under uniaxial compression are found. As dentin plastic deformation mechanisms, mutual collagen fiber sliding in the region of contact of their side surfaces, separation of these fibers from each other, and irreversible tension of some collagen fibers, are proposed. It is shown that the second mechanism activation requires a smaller stress than that for activating others. The models of plastic zones at the mode I crack tip, which correspond to these mechanisms, are studied. It is shown that the plastic zone size can increase from a few hundreds of nanometers to hundreds of micrometers with increasing applied stress.
About the authors
E. N. Borodin
Institute of Natural Sciences; Chelyabinsk State University; Institute of Problems of Mechanical Engineering
Email: m.y.gutkin@gmail.com
Russian Federation, pr. Lenina 51, Yekaterinburg, 620000; ul. Br. Kashirinykh 129, Chelyabinsk, 454001; Bolshoi pr. 61, St. Petersburg, 199178
S. Seyedkavoosi
Department of Mechanical and Aerospace Engineering
Email: m.y.gutkin@gmail.com
United States, Las Cruces, NM, 88003
D. Zaitsev
Institute of Natural Sciences
Email: m.y.gutkin@gmail.com
Russian Federation, pr. Lenina 51, Yekaterinburg, 620000
B. Drach
Department of Mechanical and Aerospace Engineering
Email: m.y.gutkin@gmail.com
United States, Las Cruces, NM, 88003
K. N. Mikaelyan
Institute of Problems of Mechanical Engineering
Email: m.y.gutkin@gmail.com
Russian Federation, Bolshoi pr. 61, St. Petersburg, 199178
P. E. Panfilov
Institute of Natural Sciences
Email: m.y.gutkin@gmail.com
Russian Federation, pr. Lenina 51, Yekaterinburg, 620000
M. Yu. Gutkin
Institute of Problems of Mechanical Engineering; Peter the Great Saint-Petersburg Polytechnic University; ITMO University
Author for correspondence.
Email: m.y.gutkin@gmail.com
Russian Federation, Bolshoi pr. 61, St. Petersburg, 199178; ul. Politekhnicheskaya 29, St. Petersburg, 195251; Kronverskiy pr.,49, St. Petersburg, 197101
I. Sevostianov
Department of Mechanical and Aerospace Engineering
Email: m.y.gutkin@gmail.com
United States, Las Cruces, NM, 88003
Supplementary files
