A Study of the Process of Gold Plating from Citrate and Phosphate Electrolytes in the Presence of Modified Detonation Nanodiamonds

V. Yu. Dolmatov; D. V. Rudenko; G. K. Burkat; A. S. Aleksandrova; A. Yu. Vul’; A. E. Aleksenskii; A. S. Kozlov; V. Myllymäki; A. Vehanen; I. A. D’yakov; A. O. Dorokhov; M. N. Kiselev

doi:10.3103/S1063457619030043

A Study of the Process of Gold Plating from Citrate and Phosphate Electrolytes in the Presence of Modified Detonation Nanodiamonds

Авторы: Dolmatov V.Y.¹, Rudenko D.V.¹, Burkat G.K.², Aleksandrova A.S.², Vul’ A.Y.³, Aleksenskii A.E.³, Kozlov A.S.¹, Myllymäki V.⁴, Vehanen A.⁴, D’yakov I.A.⁵, Dorokhov A.O.⁶, Kiselev M.N.⁶
Учреждения:
1. FSUE SCTB Technolog
2. St. Petersburg State Technological Institute
3. Ioffe Institute
4. Carbodeon Ltd. Oy
5. Tambov State Technical University
6. JSC Zavod Plastmass
Выпуск: Том 41, № 3 (2019)
Страницы: 169-177
Раздел: Production, Structure, Properties
URL: https://journals.rcsi.science/1063-4576/article/view/186523
DOI: https://doi.org/10.3103/S1063457619030043
ID: 186523

Цитировать

Полный текст

Открытый доступ
Доступ закрыт

Доступ предоставлен
Доступ закрыт

Только для подписчиков

Аннотация
Об авторах
Список литературы
Дополнительные файлы
Статистика

Аннотация

The use of modified detonation nanodiamonds in the most common gold-plating electrolytes—citrate and phosphate—makes it possible to increase microhardness by a factor of about 1.2 and wear resistance from 3.6 times up to that of a practically non-abradable coating, while keeping unchanged the electrolyte formulations, temperature, and current density which are typically used in the conventional technological process. The coating thickness is recommended to be reduced 2- to 3-fold.