A Study of the Process of Gold Plating from Citrate and Phosphate Electrolytes in the Presence of Modified Detonation Nanodiamonds

V. Yu. Dolmatov; D. V. Rudenko; G. K. Burkat; A. S. Aleksandrova; A. Yu. Vul’; A. E. Aleksenskii; A. S. Kozlov; V. Myllymäki; A. Vehanen; I. A. D’yakov; A. O. Dorokhov; M. N. Kiselev

doi:10.3103/S1063457619030043

A Study of the Process of Gold Plating from Citrate and Phosphate Electrolytes in the Presence of Modified Detonation Nanodiamonds

Авторлар: Dolmatov V.Y.¹, Rudenko D.V.¹, Burkat G.K.², Aleksandrova A.S.², Vul’ A.Y.³, Aleksenskii A.E.³, Kozlov A.S.¹, Myllymäki V.⁴, Vehanen A.⁴, D’yakov I.A.⁵, Dorokhov A.O.⁶, Kiselev M.N.⁶
Мекемелер:
1. FSUE SCTB Technolog
2. St. Petersburg State Technological Institute
3. Ioffe Institute
4. Carbodeon Ltd. Oy
5. Tambov State Technical University
6. JSC Zavod Plastmass
Шығарылым: Том 41, № 3 (2019)
Беттер: 169-177
Бөлім: Production, Structure, Properties
URL: https://journals.rcsi.science/1063-4576/article/view/186523
DOI: https://doi.org/10.3103/S1063457619030043
ID: 186523

Дәйексөз келтіру

Толық мәтін

Ашық рұқсат
Рұқсат жабық

Рұқсат берілді
Рұқсат жабық

Тек жазылушылар үшін

Аннотация
Авторлар туралы
Әдебиет тізімі
Қосымша файлдар
Статистика

Аннотация

The use of modified detonation nanodiamonds in the most common gold-plating electrolytes—citrate and phosphate—makes it possible to increase microhardness by a factor of about 1.2 and wear resistance from 3.6 times up to that of a practically non-abradable coating, while keeping unchanged the electrolyte formulations, temperature, and current density which are typically used in the conventional technological process. The coating thickness is recommended to be reduced 2- to 3-fold.