Enviar artigo por via de e-mail The Influence of SiC and Al2O3 Whiskers on the Properties of Whisker-Reinforced cBN-Based Composites
- Autores: Rumiantseva Y.Y.1, Bushlya V.N.2, Turkevich V.Z.1
-
Afiliações:
- Bakul Institute for Superhard Materials
- Division of Production and Materials Engineering
- Edição: Volume 41, Nº 6 (2019)
- Páginas: 377-387
- Seção: Production, Structure, Properties
- URL: https://journals.rcsi.science/1063-4576/article/view/186642
- DOI: https://doi.org/10.3103/S1063457619060029
- ID: 186642
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Three types of cBN-based composites with TaN binder—without whiskers, with Al2O3 whiskers, and with SiC whiskers—have been produced by the high pressure-high temperature (HPHT) sintering. Density, hardness, Poisson ratio, and fracture toughness of the composites have been studied. The whisker-reinforced cBN-based composites exhibit a higher level of mechanical properties (hardness, fracture toughness) in comparison with the non-reinforced materials.
Palavras-chave
Sobre autores
Yu. Rumiantseva
Bakul Institute for Superhard Materials
Autor responsável pela correspondência
Email: yrumuanceva@gmail.com
Ucrânia, vul. Avtozavods’ka 2, Kyiv, 04074
V. Bushlya
Division of Production and Materials Engineering
Autor responsável pela correspondência
Email: volodymyr.bushlya@iprod.lth.se
Suécia, Ole Römers väg 1, Lund, 22100
V. Turkevich
Bakul Institute for Superhard Materials
Autor responsável pela correspondência
Email: vturk@ism.kiev.ua
Ucrânia, vul. Avtozavods’ka 2, Kyiv, 04074
Arquivos suplementares
