The Influence of SiC and Al2O3 Whiskers on the Properties of Whisker-Reinforced cBN-Based Composites
- Авторы: Rumiantseva Y.1, Bushlya V.2, Turkevich V.1
-
Учреждения:
- Bakul Institute for Superhard Materials
- Division of Production and Materials Engineering
- Выпуск: Том 41, № 6 (2019)
- Страницы: 377-387
- Раздел: Production, Structure, Properties
- URL: https://journals.rcsi.science/1063-4576/article/view/186642
- DOI: https://doi.org/10.3103/S1063457619060029
- ID: 186642
Цитировать
Аннотация
Three types of cBN-based composites with TaN binder—without whiskers, with Al2O3 whiskers, and with SiC whiskers—have been produced by the high pressure-high temperature (HPHT) sintering. Density, hardness, Poisson ratio, and fracture toughness of the composites have been studied. The whisker-reinforced cBN-based composites exhibit a higher level of mechanical properties (hardness, fracture toughness) in comparison with the non-reinforced materials.
Ключевые слова
Об авторах
Yu. Rumiantseva
Bakul Institute for Superhard Materials
Автор, ответственный за переписку.
Email: yrumuanceva@gmail.com
Украина, vul. Avtozavods’ka 2, Kyiv, 04074
V. Bushlya
Division of Production and Materials Engineering
Автор, ответственный за переписку.
Email: volodymyr.bushlya@iprod.lth.se
Швеция, Ole Römers väg 1, Lund, 22100
V. Turkevich
Bakul Institute for Superhard Materials
Автор, ответственный за переписку.
Email: vturk@ism.kiev.ua
Украина, vul. Avtozavods’ka 2, Kyiv, 04074