Enviar artigo por via de e-mail The Influence of Circumferential Waviness of the Diamond Wheel Working Surface on the Machined Surface Roughness
- Autores: Pasichnyi O.O.1, Lavrinenko V.I.1
-
Afiliações:
- Bakul Institute for Superhard Materials
- Edição: Volume 41, Nº 4 (2019)
- Páginas: 278-280
- Seção: Letters to the Editor
- URL: https://journals.rcsi.science/1063-4576/article/view/186576
- DOI: https://doi.org/10.3103/S1063457619040087
- ID: 186576
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The authors investigate the potential of damping down the undulating change of form of a diamond wheel working surface by dressing it with a single-point diamond tool. This is shown to alter the machined surface roughness parameters, namely: the height parameters decrease, the spacing of the profile irregularities and the parameters of the reference length of the profile grow.
Sobre autores
O. Pasichnyi
Bakul Institute for Superhard Materials
Autor responsável pela correspondência
Email: ceramic@ism.kiev.ua
Ucrânia, vul. Avtozavods’ka 2, Kyiv, 04074
V. Lavrinenko
Bakul Institute for Superhard Materials
Autor responsável pela correspondência
Email: lavrinenko@ism.kiev.ua
Ucrânia, vul. Avtozavods’ka 2, Kyiv, 04074
Arquivos suplementares
