Possibility of Increasing the Number of Experimental Channels in VVR-Ts by Changing the Core Design


Дәйексөз келтіру

Толық мәтін

Ашық рұқсат Ашық рұқсат
Рұқсат жабық Рұқсат берілді
Рұқсат жабық Тек жазылушылар үшін

Аннотация

The modernization of the VVR-Ts core by installation of beryllium reflectors was analyzed. Calculations showed that the arrangement of beryllium blocks in six cavities at the core periphery makes it possible to install an additional experimental channel for producing radionuclides. In addition, the configuration of the remaining part of the core does not change and there is no substantial influence on the reactivity characteristics of the CPS rods. The neutron flux density of the standard core and a core with beryllium blocks at the periphery differs by less than 6.5%.

Авторлар туралы

O. Kochnov

Obninsk Branch, Karpov Research Institute of Physical Chemistry (NIFKhI)

Email: j-atomicenergy@yandex.ru
Ресей, Obninsk

V. Kolesov

Obninsk Institute of Nuclear Power Engineering, National Research Nuclear University MEPhI (IATE NIYaU MIFI)

Email: j-atomicenergy@yandex.ru
Ресей, Obninsk

R. Fomin

Obninsk Institute of Nuclear Power Engineering, National Research Nuclear University MEPhI (IATE NIYaU MIFI)

Email: j-atomicenergy@yandex.ru
Ресей, Obninsk

P. Fomichenko

National Research Center Kurchatov Institute

Email: j-atomicenergy@yandex.ru
Ресей, Moscow

Қосымша файлдар

Қосымша файлдар
Әрекет
1. JATS XML

© Springer Science+Business Media, LLC, part of Springer Nature, 2018