Optimizing the Parameters of Zr Alloy Doping with Al, Fe, and Mo via the Irradiation of Respective Films on Zr Surfaces Using Ar Ions
- Авторлар: Safonov D.A.1, Yashin A.S.1, Volkov N.V.1
-
Мекемелер:
- National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
- Шығарылым: Том 82, № 2 (2018)
- Беттер: 193-196
- Бөлім: Article
- URL: https://journals.rcsi.science/1062-8738/article/view/185309
- DOI: https://doi.org/10.3103/S1062873818020211
- ID: 185309
Дәйексөз келтіру
Аннотация
The effect the sputtering of a film–substrate system has on the modification of near-surface layers of zirconium alloy E110 (Zr–1% Nb) in the ionic mixing regime upon irradiation by a beam of argon ions with a wide energy spectrum is considered. It is shown that to increase the atoms’ efficiency of penetration and achieve the optimum doping conditions via ionic mixing upon irradiation by a beam of ions with a broad energy spectrum, the ion energy in the beam must be increased while simultaneously lowering the reduced atomic beam mass by using a combined ion beam of different masses.
Авторлар туралы
D. Safonov
National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
Email: nvvolkov@mail.ru
Ресей, Moscow, 115409
A. Yashin
National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
Email: nvvolkov@mail.ru
Ресей, Moscow, 115409
N. Volkov
National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
Хат алмасуға жауапты Автор.
Email: nvvolkov@mail.ru
Ресей, Moscow, 115409
Қосымша файлдар
