Enviar artigo por via de e-mail A Way to Increase Stability of Mechanical Properties for Rings Made of Titanium Alloy VT6 of Rocket and Gas-Turbine Engines by Forming a Globular Microstructure
- Autores: Alimov A.I.1,2, Evsyukov S.A.1, Sukhorukov R.Y.2
-
Afiliações:
- Bauman Moscow State Technical University
- Blagonravov Mechanical Engineering Research Institute, Russian Academy of Sciences
- Edição: Volume 48, Nº 4 (2019)
- Páginas: 340-347
- Seção: Reliability, Strength, and Wear Resistance of Machines and Structures
- URL: https://journals.rcsi.science/1052-6188/article/view/194285
- DOI: https://doi.org/10.3103/S1052618819040034
- ID: 194285
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Abstract—The behavior of the titanium alloy VT6 during hot forging conditions is investigated. Constitutive equations, friction conditions, and the model of microstructure evolution are found. Phase transformations are described by the Johnson–Mehl–Avrami–Kolmogorov (JMAK) model. The work focused on providing the stability of mechanical properties of rings made of the titanium alloy VT6 by obtaining a globular structure by choosing the proper modes of forming the technological process.
Palavras-chave
Sobre autores
A. Alimov
Bauman Moscow State Technical University; Blagonravov Mechanical Engineering Research Institute, Russian Academy of Sciences
Autor responsável pela correspondência
Email: alimov_ai@bmstu.ru
Rússia, Moscow, 105005; Moscow, 101990
S. Evsyukov
Bauman Moscow State Technical University
Email: alimov_ai@bmstu.ru
Rússia, Moscow, 105005
R. Sukhorukov
Blagonravov Mechanical Engineering Research Institute, Russian Academy of Sciences
Email: alimov_ai@bmstu.ru
Rússia, Moscow, 101990
Arquivos suplementares
