Мақаланы E-mail арқылы жіберу Modeling and Investigation of the Stability of a Multicutter Turning Process by a Trace
- Авторлар: Gouskov A.M.1,2, Guskov M.A.3, Tung D.D.2, Panovko G.Y.1,2
-
Мекемелер:
- Blagonravov Institute of Machines Science
- Bauman Moscow State Technical University
- Le laboratoire Procédés et Ingénierie en Mécanique et Matériaux
- Шығарылым: Том 47, № 4 (2018)
- Беттер: 317-323
- Бөлім: Mechanics of Machines
- URL: https://journals.rcsi.science/1052-6188/article/view/193908
- DOI: https://doi.org/10.3103/S1052618818040052
- ID: 193908
Дәйексөз келтіру
Ашық рұқсат
Рұқсат берілді
Тек жазылушылар үшін
Аннотация
The results of modeling and investigation of the stability of a continuous multicutter turning process are presented. The mathematical modeling is based on an equation for the formation of new surfaces, on equations of motion, and on the fractional-rational cutting law. The influence of the parameters of the technological system on the stability of the continuous cutting mode is analyzed.
Авторлар туралы
A. Gouskov
Blagonravov Institute of Machines Science; Bauman Moscow State Technical University
Хат алмасуға жауапты Автор.
Email: gouskov_am@mail.ru
Ресей, Moscow, 101990; Moscow, 105005
M. Guskov
Le laboratoire Procédés et Ingénierie en Mécanique et Matériaux
Email: gouskov_am@mail.ru
Франция, Paris
Dinh Tung
Bauman Moscow State Technical University
Email: gouskov_am@mail.ru
Ресей, Moscow, 105005
G. Panovko
Blagonravov Institute of Machines Science; Bauman Moscow State Technical University
Email: gouskov_am@mail.ru
Ресей, Moscow, 101990; Moscow, 105005
Қосымша файлдар
