Enviar artigo por via de e-mail Modeling and Investigation of the Stability of a Multicutter Turning Process by a Trace
- Autores: Gouskov A.M.1,2, Guskov M.A.3, Tung D.D.2, Panovko G.Y.1,2
-
Afiliações:
- Blagonravov Institute of Machines Science
- Bauman Moscow State Technical University
- Le laboratoire Procédés et Ingénierie en Mécanique et Matériaux
- Edição: Volume 47, Nº 4 (2018)
- Páginas: 317-323
- Seção: Mechanics of Machines
- URL: https://journals.rcsi.science/1052-6188/article/view/193908
- DOI: https://doi.org/10.3103/S1052618818040052
- ID: 193908
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The results of modeling and investigation of the stability of a continuous multicutter turning process are presented. The mathematical modeling is based on an equation for the formation of new surfaces, on equations of motion, and on the fractional-rational cutting law. The influence of the parameters of the technological system on the stability of the continuous cutting mode is analyzed.
Sobre autores
A. Gouskov
Blagonravov Institute of Machines Science; Bauman Moscow State Technical University
Autor responsável pela correspondência
Email: gouskov_am@mail.ru
Rússia, Moscow, 101990; Moscow, 105005
M. Guskov
Le laboratoire Procédés et Ingénierie en Mécanique et Matériaux
Email: gouskov_am@mail.ru
França, Paris
Dinh Tung
Bauman Moscow State Technical University
Email: gouskov_am@mail.ru
Rússia, Moscow, 105005
G. Panovko
Blagonravov Institute of Machines Science; Bauman Moscow State Technical University
Email: gouskov_am@mail.ru
Rússia, Moscow, 101990; Moscow, 105005
Arquivos suplementares
