Evolution of Crack Tip Constraint in a Mode II Elastic-Plastic Crack Problem

详细

Numerous studies have shown that crack tip constraint has an important effect on the level of conservatism when crack extension is investigated in elastic-plastic fracture mechanics. Constraint effect has been explored extensively in the past but mainly for pure mode I problems. Very few researchers have dealt with the effects of crack tip constraint on mode II or mixed mode I/II fracture in metallic materials. In this paper, the evolution of mode II constraint parameter Q in terms of applied external load is determined numerically for a test specimen under pure mode II loading. The finite element method is utilized to model the specimen and to study the range of validity of mode II constraint parameter determined from a Q—T diagram. The parameter Q calculated from the finite element simulation (or from the full field solution) is compared with the values of Q determined from the Q—T diagram. For low levels of load, the results of full field solution are shown to be consistent well with the results obtained from the Q—T diagram. However, when the external load increases significantly, the results of Q—T diagram are no longer accurate and mode II constraint parameter Q should be calculated directly from finite element results.