Modeling of thermomechanical fracture of functionally graded materials with respect to multiple crack interaction
- Авторлар: Petrova V.1,2, Schmauder S.1
-
Мекемелер:
- IMWF
- Voronezh State University
- Шығарылым: Том 20, № 3 (2017)
- Беттер: 241-249
- Бөлім: Article
- URL: https://journals.rcsi.science/1029-9599/article/view/191637
- DOI: https://doi.org/10.1134/S1029959917030018
- ID: 191637
Дәйексөз келтіру
Аннотация
Different aspects of thermomechanical fracture of functionally graded materials (FGMs) are considered. Among them are the crack interaction problems in a functionally graded coating on a homogeneous substrate (FGM/H). The interaction between systems of edge cracks is investigated, as well as, how this mutual interaction influences the fracture process and the formation of crack patterns. The problem is formulated with respect to singular integral equations which are referred to the boundary equation methods. The FGM properties are modeled by exponential functions. The main fracture characteristics are calculated, namely, the stress intensity factors, the angles of deviation of the cracks from their initial propagation direction and the critical stresses when the crack starts to propagate. The last two characteristics are calculated using an appropriate fracture criterion. The problem contains different parameters, such as the geometry (location and orientation of cracks, their lengths, and the width of the FGM layer) and material parameters, i.e. the inhomogeneity parameters of elastic and thermal coefficients of the functionally graded material. The influence of these parameters on the thermo-mechanical fracture of FGM/H is investigated. As examples the following real material combinations are discussed: TiC/SiC, Al2O3/MoSi2, MoSi2/SiC, ZrO2/nickel and ZrO2/steel.
Авторлар туралы
V. Petrova
IMWF; Voronezh State University
Хат алмасуға жауапты Автор.
Email: veraep@gmail.com
Германия, Stuttgart, D-70569; Voronezh, 394006
S. Schmauder
IMWF
Email: veraep@gmail.com
Германия, Stuttgart, D-70569