Scientific basis for cold brittleness of structural BCC steels and their structural degradation at below zero temperatures
- Авторлар: Panin V.E.1,2, Derevyagina L.S.1, Lebedev M.P.3, Syromyatnikova A.S.3, Surikova N.S.1, Pochivalov Y.I.1, Ovechkin B.B.2
-
Мекемелер:
- Institute of Strength Physics and Materials Science, Siberian Branch
- National Research Tomsk Polytechnic University
- Institute of Physical and Technical Problems of the North, Siberian Branch
- Шығарылым: Том 20, № 2 (2017)
- Беттер: 125-133
- Бөлім: Article
- URL: https://journals.rcsi.science/1029-9599/article/view/191455
- DOI: https://doi.org/10.1134/S1029959917020023
- ID: 191455
Дәйексөз келтіру
Аннотация
The paper considers the physics of cold brittleness of structural bcc steels and methods of reducing the ductile-brittle fracture temperature. A complex study was performed to examine the degradation of structural phase state of pipe steel 09Mn2Si from the main gas pipeline of Yakutia after long-term (over 3 0 years) operation. Important regularities of degradation of pearlite colonies with carbide precipitation on ferrite grain boundaries were revealed. This phenomenon is associated with brittle fracture of gas pipelines. It is shown that the low-temperature kinetic processes in main pipelines which define the degradation of their structure and properties are related to interstitial athermal structural states in the zones of local crystal structure curvature. This is a fundamentally new, as yet unknown, mechanism. Pipe steels in warm rolling acquire a longitudinal textured band structure with alternating bands of initial ferrite grains and bands of fine grains with carbide precipitates formed during lamellar pearlite degradation. This type of structure allows for a shift of ductile-brittle transition temperature down to -80°C and ductility δ = 22% at this temperature. The production of high-curvature vortex structure in pipe steel surface layers results in a 3.5-fold increase in their service life.
Авторлар туралы
V. Panin
Institute of Strength Physics and Materials Science, Siberian Branch; National Research Tomsk Polytechnic University
Хат алмасуға жауапты Автор.
Email: paninve@ispms.tsc.ru
Ресей, Tomsk, 634055; Tomsk, 634050
L. Derevyagina
Institute of Strength Physics and Materials Science, Siberian Branch
Email: paninve@ispms.tsc.ru
Ресей, Tomsk, 634055
M. Lebedev
Institute of Physical and Technical Problems of the North, Siberian Branch
Email: paninve@ispms.tsc.ru
Ресей, Yakutsk, 677007
A. Syromyatnikova
Institute of Physical and Technical Problems of the North, Siberian Branch
Email: paninve@ispms.tsc.ru
Ресей, Yakutsk, 677007
N. Surikova
Institute of Strength Physics and Materials Science, Siberian Branch
Email: paninve@ispms.tsc.ru
Ресей, Tomsk, 634055
Yu. Pochivalov
Institute of Strength Physics and Materials Science, Siberian Branch
Email: paninve@ispms.tsc.ru
Ресей, Tomsk, 634055
B. Ovechkin
National Research Tomsk Polytechnic University
Email: paninve@ispms.tsc.ru
Ресей, Tomsk, 634050
Қосымша файлдар
