Simulation of sintering of low-temperature ceramic products formed by additive technology
- Authors: Leitsin V.N.1, Ponomarev S.V.2, Dmitrieva M.A.1, Ivonin I.V.2, Tyryshkin I.M.2
-
Affiliations:
- Immanuel Kant Baltic Federal University
- National Research Tomsk State University
- Issue: Vol 20, No 4 (2017)
- Pages: 465-471
- Section: Article
- URL: https://journals.rcsi.science/1029-9599/article/view/191838
- DOI: https://doi.org/10.1134/S1029959917040129
- ID: 191838
Cite item
Abstract
Computer simulation methods have been applied to study the processes of low-temperature ceramics synthesis corresponding to technological processes. The simulation is performed for micron- and nanosized powders with different morphology. The synthesized composite medium has the characteristics (microlayer thickness, pore volume fraction, etc.) that reflect imperfections in the initial dispersion. The developed model allows one to examine the governing factors of physical and chemical processes in low-temperature ceramics synthesis.
About the authors
V. N. Leitsin
Immanuel Kant Baltic Federal University
Author for correspondence.
Email: leitsin@mail.ru
Russian Federation, Kaliningrad, 236016
S. V. Ponomarev
National Research Tomsk State University
Email: leitsin@mail.ru
Russian Federation, Tomsk, 634050
M. A. Dmitrieva
Immanuel Kant Baltic Federal University
Email: leitsin@mail.ru
Russian Federation, Kaliningrad, 236016
I. V. Ivonin
National Research Tomsk State University
Email: leitsin@mail.ru
Russian Federation, Tomsk, 634050
I. M. Tyryshkin
National Research Tomsk State University
Email: leitsin@mail.ru
Russian Federation, Tomsk, 634050