Investigation of Plastically Deformed TRIP-Composites by Neutron Diffraction and Small-Angle Neutron Scattering Methods


Дәйексөз келтіру

Толық мәтін

Ашық рұқсат Ашық рұқсат
Рұқсат жабық Рұқсат берілді
Рұқсат жабық Тек жазылушылар үшін

Аннотация

The main parameters of the microstructure of TRIP (TRansformation Induced Plasticity) composites with an austenitic matrix and a ZrO2 zirconium-dioxide reinforcing phase subjected to plastic deformation of different degrees (compressive uniaxial load) are studied by neutron diffraction and small-angle neutron scattering. A series of composite material samples with different contents of the ZrO2 ceramic phase (0, 10, 20, 30, and 100 wt %) are prepared by the powder metallurgy method using hot pressing. In the region of plastic deformation at load values above 650 MPa, two phases are observed in the austenitic matrix: cubic α'-martensite and hexagonal ε-martensite. Data on the lattice strains of the observed phases, dislocation density in the austenitic matrix, and characteristic sizes of the martensitic-phase particles are obtained.

Авторлар туралы

G. Bokuchava

Joint Institute for Nuclear Research

Хат алмасуға жауапты Автор.
Email: gizo@nf.jinr.ru
Ресей, Dubna, 141980

Yu. Gorshkova

Joint Institute for Nuclear Research

Email: gizo@nf.jinr.ru
Ресей, Dubna, 141980

I. Papushkin

Joint Institute for Nuclear Research

Email: gizo@nf.jinr.ru
Ресей, Dubna, 141980

S. Guk

Institute for Metal Forming

Email: gizo@nf.jinr.ru
Германия, Freiberg

R. Kawalla

Institute for Metal Forming

Email: gizo@nf.jinr.ru
Германия, Freiberg

Қосымша файлдар

Қосымша файлдар
Әрекет
1. JATS XML

© Pleiades Publishing, Ltd., 2018