Effectiveness of the MFAS Method for Determining the Wind Velocity Vector from Windcube 200s Lidar Measurements


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

The technique of the maximum of the function of accumulated spectra (MFAS) is used for the first time for estimating the wind velocity vector from measurements with a micropulsed coherent Doppler lidar (MPCDL) in the process of conical scanning by a probing beam. It is established in the experiment with the Windcube 200s MPCDL that MFAS technique makes it possible to increase the maximum altitude of retrieval of the vertical profiles of the wind speed and direction by 30% on average as compared to the filtered sine wave fitting.

Sobre autores

A. Stephan

Institute of Atmospheric Physics of the German Aerospace Center (DLR)

Autor responsável pela correspondência
Email: Anton.Stephan@dlr.de
Alemanha, Oberpfaffenhofen-Wessling, 82234

N. Wildmann

Institute of Atmospheric Physics of the German Aerospace Center (DLR)

Autor responsável pela correspondência
Email: Norman.Wildmann@dlr.de
Alemanha, Oberpfaffenhofen-Wessling, 82234

I. Smalikho

V.E. Zuev Institute of Atmospheric Optics, Siberian Branch, Russian Academy of Sciences

Autor responsável pela correspondência
Email: smalikho@iao.ru
Rússia, Tomsk, 634055

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Pleiades Publishing, Ltd., 2019