Research of the Microstructure of Fe30Cu70 Alloy Obtained by Different Technologies
- 作者: Filonov M.1, Sanin V.1, Dzidziguri E.1, Anikin Y.1, Kostitsina E.1
-
隶属关系:
- National University of Science and Technology MISiS
- 期: 卷 49, 编号 10 (2019)
- 页面: 720-725
- 栏目: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/180871
- DOI: https://doi.org/10.3103/S0967091219100073
- ID: 180871
如何引用文章
详细
The influence of manufacturing material methods based on Fe30Cu70 on their microstructure and inclusion size, which is determined by the cooling rate of the melt during crystallization, is investigated. The line structure of the solid phase microstructure enriched in iron in the early stages of cooling can be traced with all the technologies for producing the Fe30Cu70 alloy. It was found that the higher the cooling rate, the less manifested was the network nature of the structure. An elemental analysis of the structure showed that the content of iron and copper in all structural components is greater than the maximum possible mutual solubility of the elements.
作者简介
M. Filonov
National University of Science and Technology MISiS
Email: ognemet@misis.ru
俄罗斯联邦, Moscow, 119049
V. Sanin
National University of Science and Technology MISiS
Email: ognemet@misis.ru
俄罗斯联邦, Moscow, 119049
E. Dzidziguri
National University of Science and Technology MISiS
Email: ognemet@misis.ru
俄罗斯联邦, Moscow, 119049
Yu. Anikin
National University of Science and Technology MISiS
Email: ognemet@misis.ru
俄罗斯联邦, Moscow, 119049
E. Kostitsina
National University of Science and Technology MISiS
编辑信件的主要联系方式.
Email: ognemet@misis.ru
俄罗斯联邦, Moscow, 119049