Research of the Microstructure of Fe30Cu70 Alloy Obtained by Different Technologies
- Авторы: Filonov M.1, Sanin V.1, Dzidziguri E.1, Anikin Y.1, Kostitsina E.1
-
Учреждения:
- National University of Science and Technology MISiS
- Выпуск: Том 49, № 10 (2019)
- Страницы: 720-725
- Раздел: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/180871
- DOI: https://doi.org/10.3103/S0967091219100073
- ID: 180871
Цитировать
Аннотация
The influence of manufacturing material methods based on Fe30Cu70 on their microstructure and inclusion size, which is determined by the cooling rate of the melt during crystallization, is investigated. The line structure of the solid phase microstructure enriched in iron in the early stages of cooling can be traced with all the technologies for producing the Fe30Cu70 alloy. It was found that the higher the cooling rate, the less manifested was the network nature of the structure. An elemental analysis of the structure showed that the content of iron and copper in all structural components is greater than the maximum possible mutual solubility of the elements.
Об авторах
M. Filonov
National University of Science and Technology MISiS
Email: ognemet@misis.ru
Россия, Moscow, 119049
V. Sanin
National University of Science and Technology MISiS
Email: ognemet@misis.ru
Россия, Moscow, 119049
E. Dzidziguri
National University of Science and Technology MISiS
Email: ognemet@misis.ru
Россия, Moscow, 119049
Yu. Anikin
National University of Science and Technology MISiS
Email: ognemet@misis.ru
Россия, Moscow, 119049
E. Kostitsina
National University of Science and Technology MISiS
Автор, ответственный за переписку.
Email: ognemet@misis.ru
Россия, Moscow, 119049