| Шығарылым |
Атауы |
Файл |
| Том 46, № 9 (2016) |
Converter smelting of steel with preliminary scrap heating to reduce hot-metal consumption |
(Eng)
|
|
Pak Y., Filippov G., Glukhikh M.
|
| Том 46, № 9 (2016) |
Dynamic model of the ladle treatment of steel |
(Eng)
|
|
Tikhonov G., Rudnitskii I., Voskoboinik M.
|
| Том 46, № 9 (2016) |
Surface-crack formation in the manufacture of microalloyed steel pipe |
(Eng)
|
|
Kolbasnikov N., Mishin V., Shishov I., Matveev M., Korchagin A.
|
| Том 46, № 9 (2016) |
Coercive force and strength of carbon steel |
(Eng)
|
|
Sandomirskii S.
|
| Том 46, № 8 (2016) |
Influence of the chromium concentration on structure formation in liquid chromonickel alloys |
(Eng)
|
|
Tyagunov A., V’yukhin V., Tyagunov G., Baryshev E., Akshentsev Y.
|
| Том 46, № 8 (2016) |
Changes in ultrasound velocity in the plastic deformation of high-chromium steel |
(Eng)
|
|
Barannikova S., Bochkareva A., Lunev A., Shlyakhova G., Zuev L.
|
| Том 46, № 8 (2016) |
Influence of hybrid plastic deformation on the microstructure and mechanical properties of carbon-steel wire |
(Eng)
|
|
Chukin M., Polyakova M., Gulin A.
|
| Том 46, № 8 (2016) |
Thermomechanical properties of molds based on different binders and casting quality |
(Eng)
|
|
Chernyshov E., Evlampiev A., Korolev A., Ivanova L., Moiseeva O.
|
| Том 46, № 8 (2016) |
Thermal stress in iron-ore pellets with differentiated porosity |
(Eng)
|
|
Pavlovets V., Gerasimuk A.
|
| Том 46, № 8 (2016) |
Thermal solution of coal to obtain binder for refractories. 1. Binder production |
(Eng)
|
|
Bazegskii A., Shkoller M.
|
| Том 46, № 8 (2016) |
Solution of niobium in iron during arc surfacing |
(Eng)
|
|
Sarychev V., Khaimzon B., Nevskii S.
|
| Том 46, № 8 (2016) |
Degradation of rail-steel structure and properties of the surface layer |
(Eng)
|
|
Ivanov Y., Morozov K., Peregudov O., Gromov V.
|
| Том 46, № 8 (2016) |
Forging and pressing technology at PAO Ruspolimet |
(Eng)
|
|
Marchuk V., Chuchkov A., Martynov S.
|
| Том 46, № 8 (2016) |
Magnetic properties and fine structure of amorphous Fe–Ni–Si–B alloys |
(Eng)
|
|
Vavilova V., Korneev V., Kornienkov B., Libman M., Molotilov B., Kadyshev D.
|
| Том 46, № 8 (2016) |
Influence of recrystallizing annealing on the properties of high-alloy isotropic steel with ultralow magnetic losses |
(Eng)
|
|
Cheglov A., Pogodaev A., Yusupov V., Bakhtin S., Barybin D., Bakhtin A.
|
| Том 46, № 8 (2016) |
Formation and prevention of flexure defects at the surface of cold-rolled steel strip |
(Eng)
|
|
Mazur V., Pargamonov E.
|
| Том 46, № 8 (2016) |
Influence of mold flux on the thermal processes in the mold |
(Eng)
|
|
Anisimov K., Longinov A., Gusev M., Zarubin S.
|
| Том 46, № 8 (2016) |
Indirect reduction in blast-furnace smelting |
(Eng)
|
|
Kurunov I., Filatov S., Tikhonov D., Basov V.
|
| Том 46, № 8 (2016) |
Influence of the composition of high-temperature nickel-alloy electrodes on the ingot composition in vacuum arc remelting |
(Eng)
|
|
Korzun E., Klochai V., Ryabtsev A.
|
| Том 46, № 7 (2016) |
Thermodynamics of oxygen solutions in nickel melts containing aluminum and titanium |
(Eng)
|
|
Aleksandrov A., Dashevskii V., Leont’ev L.
|
| Том 46, № 7 (2016) |
Production of periodic bars by vibrational drawing |
(Eng)
|
|
Gorbatyuk S., Shapoval A., Mos’pan D., Dragobetskii V.
|
| Том 46, № 7 (2016) |
Reducing the high-temperature loss of steel in furnaces |
(Eng)
|
|
Shul’ts L.
|
| Том 46, № 7 (2016) |
Roller temperature in metallurgical machines with scale formation |
(Eng)
|
|
Telin N., Sinitsyn N.
|
| Том 46, № 7 (2016) |
Wear-resistant aluminum and chromonickel coatings at the narrow mold walls in continuous-casting machines |
(Eng)
|
|
Gerasimova A., Radyuk A., Titlyanov A.
|
| Том 46, № 7 (2016) |
Expansion of a pair of dissimilar metal shells in lined-pipe production |
(Eng)
|
|
Bogatov N., Bogatov A., Salikhyanov D.
|
| Нәтижелер 621 - 501/525 |
<< < 16 17 18 19 20 21 22 23 24 25 > >>
|
