Email this article Dynamic model of the ladle treatment of steel
- Authors: Tikhonov G.I.1, Rudnitskii I.N.1, Voskoboinik M.M.1
-
Affiliations:
- PAO Chelyabinskii Metallurgicheskii Kombinat (ChMK)
- Issue: Vol 46, No 9 (2016)
- Pages: 662-664
- Section: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/179051
- DOI: https://doi.org/10.3103/S0967091216090114
- ID: 179051
Cite item
Open Access
Access granted
Subscription Access
Abstract
The basic factors that affect the ladle treatment of steel are analyzed. Balance equations, chemicalkinetic equations, thermodynamic equations, and hydrodynamic and gas-dynamic equations are written for the treatment of steel in a ladle–furnace unit with a vacuum-degassing system. A cylindrically symmetric calculation grid is developed. The equations are adapted on the basis of the finite-element method.
About the authors
G. I. Tikhonov
PAO Chelyabinskii Metallurgicheskii Kombinat (ChMK)
Author for correspondence.
Email: tixonovgi@mychel.ru
Russian Federation, Chelyabinsk
I. N. Rudnitskii
PAO Chelyabinskii Metallurgicheskii Kombinat (ChMK)
Email: tixonovgi@mychel.ru
Russian Federation, Chelyabinsk
M. M. Voskoboinik
PAO Chelyabinskii Metallurgicheskii Kombinat (ChMK)
Email: tixonovgi@mychel.ru
Russian Federation, Chelyabinsk
