Email this article Influence of smelting on the structure and properties of an Ni3Al intermetallic alloy
- Authors: Drozdov A.A.1,2, Skachkov O.A.1, Zhukov P.O.1, Berezina T.A.1
-
Affiliations:
- Bardin Central Research Institute of Ferrous Metallurgy
- Baikov Institute of Metallurgy and Materials Science
- Issue: Vol 47, No 4 (2017)
- Pages: 280-286
- Section: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/179546
- DOI: https://doi.org/10.3103/S0967091217040039
- ID: 179546
Cite item
Open Access
Access granted
Subscription Access
Abstract
Ni3Al intermetallic alloys are produced by open inductive smelting with two different fluxes and subsequent centrifugal casting. The structure and phase composition of the alloys are investigated. Alloy samples undergo tensile tests at room temperature and elevated temperatures. The dependence of the structure and mechanical properties of the alloys on the smelting conditions is established.
About the authors
A. A. Drozdov
Bardin Central Research Institute of Ferrous Metallurgy; Baikov Institute of Metallurgy and Materials Science
Email: oa_skachkov@mail.ru
Russian Federation, Moscow; Moscow
O. A. Skachkov
Bardin Central Research Institute of Ferrous Metallurgy
Author for correspondence.
Email: oa_skachkov@mail.ru
Russian Federation, Moscow
P. O. Zhukov
Bardin Central Research Institute of Ferrous Metallurgy
Email: oa_skachkov@mail.ru
Russian Federation, Moscow
T. A. Berezina
Bardin Central Research Institute of Ferrous Metallurgy
Email: oa_skachkov@mail.ru
Russian Federation, Moscow
Supplementary files
