Enviar artigo por via de e-mail Influence of smelting on the structure and properties of an Ni3Al intermetallic alloy
- Autores: Drozdov A.A.1,2, Skachkov O.A.1, Zhukov P.O.1, Berezina T.A.1
-
Afiliações:
- Bardin Central Research Institute of Ferrous Metallurgy
- Baikov Institute of Metallurgy and Materials Science
- Edição: Volume 47, Nº 4 (2017)
- Páginas: 280-286
- Seção: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/179546
- DOI: https://doi.org/10.3103/S0967091217040039
- ID: 179546
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Ni3Al intermetallic alloys are produced by open inductive smelting with two different fluxes and subsequent centrifugal casting. The structure and phase composition of the alloys are investigated. Alloy samples undergo tensile tests at room temperature and elevated temperatures. The dependence of the structure and mechanical properties of the alloys on the smelting conditions is established.
Palavras-chave
Sobre autores
A. Drozdov
Bardin Central Research Institute of Ferrous Metallurgy; Baikov Institute of Metallurgy and Materials Science
Email: oa_skachkov@mail.ru
Rússia, Moscow; Moscow
O. Skachkov
Bardin Central Research Institute of Ferrous Metallurgy
Autor responsável pela correspondência
Email: oa_skachkov@mail.ru
Rússia, Moscow
P. Zhukov
Bardin Central Research Institute of Ferrous Metallurgy
Email: oa_skachkov@mail.ru
Rússia, Moscow
T. Berezina
Bardin Central Research Institute of Ferrous Metallurgy
Email: oa_skachkov@mail.ru
Rússia, Moscow
Arquivos suplementares
