Stripe delay filters


Цитировать

Полный текст

Открытый доступ Открытый доступ
Доступ закрыт Доступ предоставлен
Доступ закрыт Только для подписчиков

Аннотация

There are considered constructions of microsized stripe delay filters, which are realized on a basis of ceramic materials with high dielectric permittivity. Delay time of non-minimal phase filters is 7–12 ns at frequencies of 1900 MHz with relative bandwidth of 3.6–3.85%. Filters dimensions are comparable with ones used in portable communication devices. Dimensions of researched three-resonator filter at frequency of 1900 MHz are 8.4×5×2mmwith material dielectric permittivity εr = 92, and 5-resonator filter ones are 9.2×8.6×2 mm. Filters are different from traditional delay filters. Two filters of considered ones contain odd resonator number and the third one contains four resonators and it has two cross couplings. The basis of the filters is amount of step-impedance stripe resonators pairs located close to each others whose electromagnetic coupling behavior is capacitive. There are represented the results of frequency characteristics simulation for different delay filters.

Об авторах

A. Zakharov

National Technical University of Ukraine “Kyiv Polytechnic Institute”

Автор, ответственный за переписку.
Email: a.zakharov@bk.ru
Украина, Kyiv

M. Ilchenko

National Technical University of Ukraine “Kyiv Polytechnic Institute”

Email: a.zakharov@bk.ru
Украина, Kyiv

I. Trubarov

National Technical University of Ukraine “Kyiv Polytechnic Institute”

Email: a.zakharov@bk.ru
Украина, Kyiv

L. Pinchuk

National Technical University of Ukraine “Kyiv Polytechnic Institute”

Email: a.zakharov@bk.ru
Украина, Kyiv


© Allerton Press, Inc., 2016

Данный сайт использует cookie-файлы

Продолжая использовать наш сайт, вы даете согласие на обработку файлов cookie, которые обеспечивают правильную работу сайта.

О куки-файлах