Stripe delay filters


Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription Access

Abstract

There are considered constructions of microsized stripe delay filters, which are realized on a basis of ceramic materials with high dielectric permittivity. Delay time of non-minimal phase filters is 7–12 ns at frequencies of 1900 MHz with relative bandwidth of 3.6–3.85%. Filters dimensions are comparable with ones used in portable communication devices. Dimensions of researched three-resonator filter at frequency of 1900 MHz are 8.4×5×2mmwith material dielectric permittivity εr = 92, and 5-resonator filter ones are 9.2×8.6×2 mm. Filters are different from traditional delay filters. Two filters of considered ones contain odd resonator number and the third one contains four resonators and it has two cross couplings. The basis of the filters is amount of step-impedance stripe resonators pairs located close to each others whose electromagnetic coupling behavior is capacitive. There are represented the results of frequency characteristics simulation for different delay filters.

About the authors

A. V. Zakharov

National Technical University of Ukraine “Kyiv Polytechnic Institute”

Author for correspondence.
Email: a.zakharov@bk.ru
Ukraine, Kyiv

M. Ye. Ilchenko

National Technical University of Ukraine “Kyiv Polytechnic Institute”

Email: a.zakharov@bk.ru
Ukraine, Kyiv

I. V. Trubarov

National Technical University of Ukraine “Kyiv Polytechnic Institute”

Email: a.zakharov@bk.ru
Ukraine, Kyiv

L. S. Pinchuk

National Technical University of Ukraine “Kyiv Polytechnic Institute”

Email: a.zakharov@bk.ru
Ukraine, Kyiv


Copyright (c) 2016 Allerton Press, Inc.

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies