Assessment of Influence of Flow Diverter on the Metrological Characteristics of Calibration Devices Used for the Units of Mass and Unit of Volume of a Liquid in a Flow and of Mass and Volume Discharges of Liquid


Дәйексөз келтіру

Толық мәтін

Ашық рұқсат Ашық рұқсат
Рұқсат жабық Рұқсат берілді
Рұқсат жабық Тек жазылушылар үшін

Аннотация

A new approach to the assessment of interfering factors that arise in the process of diversion of a flow of liquid in the weighing device of a calibration device is presented. The uncertainty budget of the calibration device in reproduction of the unit of mass and unit of volume of liquid in a flow and unit of mass and unit of volume discharge of liquid is considered for this case. The operating principle of the calibration device is based on the method of static weighing. An assessment of the sources of uncertainty is performed by a pneumometric technique, which is itself based on an experimental determination of the local characteristics of the flow of liquid.

Авторлар туралы

R. Korneev

All-Russia Research Institute of Flow Metering (VNIIR)

Хат алмасуға жауапты Автор.
Email: nio1@vniir.org
Ресей, Kazan

A. Tukhvatullin

All-Russia Research Institute of Flow Metering (VNIIR)

Email: nio1@vniir.org
Ресей, Kazan

V. Fafurin

All-Russia Research Institute of Flow Metering (VNIIR)

Email: nio1@vniir.org
Ресей, Kazan

A. Shchelchkov

All-Russia Research Institute of Flow Metering (VNIIR); Kazan National Research Technical University (KAI)

Email: nio1@vniir.org
Ресей, Kazan; Kazan

Қосымша файлдар

Қосымша файлдар
Әрекет
1. JATS XML

© Springer Science+Business Media, LLC, part of Springer Nature, 2019