Email this article Assessment of Influence of Flow Diverter on the Metrological Characteristics of Calibration Devices Used for the Units of Mass and Unit of Volume of a Liquid in a Flow and of Mass and Volume Discharges of Liquid
- Authors: Korneev R.A.1, Tukhvatullin A.R.1, Fafurin V.A.1, Shchelchkov A.V.1,2
-
Affiliations:
- All-Russia Research Institute of Flow Metering (VNIIR)
- Kazan National Research Technical University (KAI)
- Issue: Vol 62, No 4 (2019)
- Pages: 347-353
- Section: Mechanical Measurements
- URL: https://journals.rcsi.science/0543-1972/article/view/246712
- DOI: https://doi.org/10.1007/s11018-019-01628-8
- ID: 246712
Cite item
Open Access
Access granted
Subscription Access
Abstract
A new approach to the assessment of interfering factors that arise in the process of diversion of a flow of liquid in the weighing device of a calibration device is presented. The uncertainty budget of the calibration device in reproduction of the unit of mass and unit of volume of liquid in a flow and unit of mass and unit of volume discharge of liquid is considered for this case. The operating principle of the calibration device is based on the method of static weighing. An assessment of the sources of uncertainty is performed by a pneumometric technique, which is itself based on an experimental determination of the local characteristics of the flow of liquid.
About the authors
R. A. Korneev
All-Russia Research Institute of Flow Metering (VNIIR)
Author for correspondence.
Email: nio1@vniir.org
Russian Federation, Kazan
A. R. Tukhvatullin
All-Russia Research Institute of Flow Metering (VNIIR)
Email: nio1@vniir.org
Russian Federation, Kazan
V. A. Fafurin
All-Russia Research Institute of Flow Metering (VNIIR)
Email: nio1@vniir.org
Russian Federation, Kazan
A. V. Shchelchkov
All-Russia Research Institute of Flow Metering (VNIIR); Kazan National Research Technical University (KAI)
Email: nio1@vniir.org
Russian Federation, Kazan; Kazan
