Method for Determining Defects on the Inner Walls of Tubing from the Velocity Distribution of the Flowing Fluid
- Authors: Davydov V.V.1,2, Kruzhalov S.V.1, Grebenikova N.M.1, Smirnov K.Y.3
-
Affiliations:
- Peter the Great St. Petersburg Polytechnic University
- All-Russia Research Institute of Plant Pathology
- Bonch-Bruevich St. Petersburg State University of Telecommunications
- Issue: Vol 61, No 4 (2018)
- Pages: 365-372
- Section: Article
- URL: https://journals.rcsi.science/0543-1972/article/view/246458
- DOI: https://doi.org/10.1007/s11018-018-1435-0
- ID: 246458
Cite item
Abstract
The flow structure of a liquid medium in tubing with a circular cross section is investigated. A method has been developed for determining the defects of the inner walls of tubing using laser radiation scattered on particles of the flowing fluid. The results of determining the fluid flow velocity profile in the tubing cross section along the length of this tubing are presented. A new technique is proposed for measuring the point coordinates describing the location of the defect in terms of the length and inner diameter of the tubing.
About the authors
V. V. Davydov
Peter the Great St. Petersburg Polytechnic University; All-Russia Research Institute of Plant Pathology
Author for correspondence.
Email: davydov_vadim66@mail.ru
Russian Federation, St. Petersburg; Bolshye Vyaziomy, Moscow Region
S. V. Kruzhalov
Peter the Great St. Petersburg Polytechnic University
Email: davydov_vadim66@mail.ru
Russian Federation, St. Petersburg
N. M. Grebenikova
Peter the Great St. Petersburg Polytechnic University
Email: davydov_vadim66@mail.ru
Russian Federation, St. Petersburg
K. Ya. Smirnov
Bonch-Bruevich St. Petersburg State University of Telecommunications
Email: davydov_vadim66@mail.ru
Russian Federation, St. Petersburg