Email this article Methods and Devices for Monitoring the Process of Laser Cleaning of Artworks
- Authors: Parfenov V.A.1,2
-
Affiliations:
- St. Petersburg State Electrical Engineering University (LETI)
- St. Petersburg National Research University of Information Technologies, Mechanics, and Optics (ITMO)
- Issue: Vol 61, No 4 (2018)
- Pages: 353-359
- Section: Optophysical Measurements
- URL: https://journals.rcsi.science/0543-1972/article/view/246455
- DOI: https://doi.org/10.1007/s11018-018-1433-2
- ID: 246455
Cite item
Open Access
Access granted
Subscription Access
Abstract
A method of monitoring the process of laser cleaning of monuments and other works of art in the course of conservation is presented. The capabilities of the method of laser-induced breakdown plasma spectroscopy in cleaning of monuments made of metal are considered. A photometric device based on an integrating cavity in the form of a cylinder is developed and investigated. The capabilities gained with the use of the device for proximate analysis of the efficiency of the process of cleaning the surfaces of sculpture made of marble and limestone structures are shown.
About the authors
V. A. Parfenov
St. Petersburg State Electrical Engineering University (LETI); St. Petersburg National Research University of Information Technologies, Mechanics, and Optics (ITMO)
Author for correspondence.
Email: vaparfenov@etu.ru
Russian Federation, St. Petersburg; St. Petersburg
Supplementary files
