Enviar artigo por via de e-mail Calibration of Photoemission Pyrometer without Using Standard Temperature Radiators
- Autores: Viazava K.A.1, Kasparov K.N.1, Miatselskaya N.S.2, Penyazkov O.G.1
-
Afiliações:
- Lykov Institute of Heat and Mass Transfer, National Academy of Sciences of Belarus
- Stepanov Physics Institute, National Academy of Sciences of Belarus
- Edição: Volume 60, Nº 6 (2017)
- Páginas: 578-582
- Seção: Thermal Measurements
- URL: https://journals.rcsi.science/0543-1972/article/view/246196
- DOI: https://doi.org/10.1007/s11018-017-1238-8
- ID: 246196
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The possibility of calibrating a photoemission pyrometer without using a standard temperaturel radiator is examined. The validity of such calibration is shown, since the calculated calibration curve agrees with that obtained with the use of a ribbon filament lamp.
Sobre autores
K. Viazava
Lykov Institute of Heat and Mass Transfer, National Academy of Sciences of Belarus
Autor responsável pela correspondência
Email: viazava.kate@gmail.com
Belarus, Minsk
K. Kasparov
Lykov Institute of Heat and Mass Transfer, National Academy of Sciences of Belarus
Email: viazava.kate@gmail.com
Belarus, Minsk
N. Miatselskaya
Stepanov Physics Institute, National Academy of Sciences of Belarus
Email: viazava.kate@gmail.com
Belarus, Minsk
O. Penyazkov
Lykov Institute of Heat and Mass Transfer, National Academy of Sciences of Belarus
Email: viazava.kate@gmail.com
Belarus, Minsk
Arquivos suplementares
