Enviar artigo por via de e-mail Method for Measuring Cutting Force During Ultrahigh-Speed Metal Processing
- Autores: Korneeva V.M.1, Korneev S.S.1
-
Afiliações:
- Bauman Moscow State Technical University
- Edição: Volume 60, Nº 3 (2017)
- Páginas: 248-253
- Seção: Mechanical Measurements
- URL: https://journals.rcsi.science/0543-1972/article/view/246105
- DOI: https://doi.org/10.1007/s11018-017-1181-8
- ID: 246105
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
A method has been developed to measure the cutting force during ultrahigh-speed metal processing, making it possible to estimate this force during processing. A specialized measuring transducer was designed and a methodology was created to interpret the transducer signal directly as it is being recorded by registration equipment.
Palavras-chave
Sobre autores
V. Korneeva
Bauman Moscow State Technical University
Autor responsável pela correspondência
Email: v_korneeva@list.ru
Rússia, Moscow
S. Korneev
Bauman Moscow State Technical University
Email: v_korneeva@list.ru
Rússia, Moscow
Arquivos suplementares
